|
|
 Rank: Pro  Groups: Registered
Joined: 07/06/2013 Posts: 144 Points: 415 Location: New Zealand
|
Been searching for information on the laying of the 7th plank. The reason for this is I have noticed that if the stern plan is taken down by 1mm it puts it that much out with the forward plank, where they join. I have checked Tomicks build and it does say that the forward plank needs to be tapered but only from frame 13.
I have double checked and it does say to cut the stern plank down by 1mm for the whole length.
|
|
|
 Rank: Super-Elite       Groups: Registered
Joined: 30/01/2013 Posts: 4,604 Points: 13,607 Location: Monmouthshire UK
|
Sinbad, Tapering the plank doesn't mean you remove 1mm from the whole length, it mean the taper starts at one end right along the length, so the end meeting the mid plank is 5mm wide, the other end is 4mm wide. Tomick's build doesn't say "cut the stern plank down by 1mm for the whole length" - it says:- "This plank will also need to be tapered by about 1mm along its length, which is to keep the line of planks parallel to the deck line rather than rising upwards towards the stern" Hope this makes sense. Steve
|
|
|
|
|
Correct Steve. your plank should be 5mm at one end and gradually reduce to 4mm at the other loosing 1mm. does that help? Jase “Whenever you find yourself on the side of the majority, it is time to pause and reflect.”
-Mark Twain
|
|
|
Rank: Pro Groups: Registered
Joined: 07/06/2013 Posts: 144 Points: 415 Location: New Zealand
|
Thanks guys. I had a feeling this might be the case.
1mm to 5mm is tapering. Perhaps it was a misprint in my mag.
Anyway, problem solved.
Thanks again.
|
|
|
Rank: Super-Elite Groups: Registered
Joined: 30/01/2013 Posts: 4,604 Points: 13,607 Location: Monmouthshire UK
|
Sinbad wrote:Thanks guys. I had a feeling this might be the case.
1mm to 5mm is tapering. Perhaps it was a misprint in my mag.
Anyway, problem solved.
Thanks again. Correct - 1mm to 5mm is tapering, but in your case you want 4mm to 5mm  from stern to frame 24 Steve
|
|
|
|
Guest (2)
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
