|
|
 Rank: Pro    Groups: Registered
Joined: 23/03/2014 Posts: 185 Points: 545 Location: Essex
|
|
|
|
Rank: Pro  Groups: Registered
Joined: 20/12/2011 Posts: 236 Points: 686 Location: shetland
|
hi, thanks for the great tips, The tape I used was good, I think I never pressed it down enough  . I should have asked before I done it, That tip Steve was great, I will touch it up a bit, I hope I have enough paint  . thanks again for the advice. rob
|
|
|
 Rank: Elite   Groups: Unapproved
Joined: 24/05/2010 Posts: 1,761 Points: 5,351 Location: London & Greece
|
That is a gorgeous hull, Rob.
|
|
|
|
|
I would recommend you do a trial first on some scrap. If your not carful you can get to much build up of paint which can result in you having a ridge.
As always when trying something new experiment with it first
Jase“Whenever you find yourself on the side of the majority, it is time to pause and reflect.”
-Mark Twain
|
|
|
 Rank: Super-Elite    Groups: Registered
Joined: 30/01/2013 Posts: 4,604 Points: 13,607 Location: Monmouthshire UK
|
Hi I will point out that the second yellow coat is just a quick brush over to seal the tape. The method works fine and I used it on my Vic build and can see no visible ridge where the two colours meet- http://forum.model-space...osts&t=6074&p=2
You can also use a matt varnish instead of the yellow to seal the tape. But, as Jase suggested, if you have doubts you could also have a practice on some scrap wood before trying on the Vic Steve
|
|
|
Rank: Pro Groups: Registered
Joined: 20/12/2011 Posts: 236 Points: 686 Location: shetland
|
Thanks for that, Another thing is that I wish I had left off the wriggles before I painted  cheers
|
|
|
Rank: Super-Elite Groups: Registered
Joined: 30/01/2013 Posts: 4,604 Points: 13,607 Location: Monmouthshire UK
|
I know what you mean about the wriggles, I painted my Vic stripes way earlier than the mags say to. I did it when I had a nice clean hull with no obstructions for the masking. There were many cases of re-touching later though but I though this was an easier way for me. Steve
|
|
|
Rank: Pro Groups: Registered
Joined: 20/12/2011 Posts: 236 Points: 686 Location: shetland
|
hi steve, I just never realised what involved in painting,as it is my first build after all. There are a lot of instances in the magazine where some things should have been done at different stages etc., but not knowing what to expect what do you do. I am not complaining  like the masts for example, it might have been better done after the hull was finished. I am still enjoying the build after all said and done. Great hobby to do. even better when I get all the advice I have had, I presume I am not the only one. Thanks again rob ps. just had a look at your great build and seen there were no wriggles when you painted. OH! hindsight again.
|
|
|
Rank: Pro Groups: Registered
Joined: 20/12/2011 Posts: 236 Points: 686 Location: shetland
|
Hi again, has any body any better ideas for putting the wire around these deadeyes Issue 75 page 12. I am finding it a nightmare  just a thought. thanks rob
|
|
|
Rank: Super-Elite Groups: Registered
Joined: 30/01/2013 Posts: 4,604 Points: 13,607 Location: Monmouthshire UK
|
Hi Pete I did see some other ways to do this but I used the mag / official build way and found it to be fine, not easy I admit and a bit repetitive but take your time and it will be ok , you may even work out another method while you are doing it. Steve
|
|
|
Rank: Pro Groups: Registered
Joined: 20/12/2011 Posts: 236 Points: 686 Location: shetland
|
Hi steve, I have done 4 of them, lost two,just pinged out of my fingers if there are no spares I will have to order a back issue . Fingers are a bit big to grab the little  .... Just have to take my time as you say. cheers mate rob
|
|
|
Rank: Super-Elite Groups: Registered
Joined: 30/01/2013 Posts: 4,604 Points: 13,607 Location: Monmouthshire UK
|
You may need to find those deadeyes again as there are not many spares supplied. No need to order back issues though - http://www.cornwallmodel...artesania-deadeyes.html
I will say one thing I did though was to use black coated wire of a slightly thinner gauge. The reason for this is that I wanted the deadeyes black as per the the real Victory and this saved painting the wire, easier to twist also so maybe that's why I had no real trouble  Steve
|
|
|
Rank: Pro Groups: Registered
Joined: 20/12/2011 Posts: 236 Points: 686 Location: shetland
|
Thanks again steve I will have another look if not I will try that link. I did try to order some stuff from them but they wanted £20 postage. I will phone them if I cannot find the other ones.
thanks again.
ps.Where did you get the wire from???
cheers
|
|
|
Rank: Super-Elite Groups: Registered
Joined: 30/01/2013 Posts: 4,604 Points: 13,607 Location: Monmouthshire UK
|
http://www.ebay.co.uk/it...amp;hash=item417386a1a0
I think I used 0.8mm which thinking about it may not actually be thinner than the original but was much nicer to bend and twist as there was no spring in it. Steve
|
|
|
Rank: Pro Groups: Registered
Joined: 20/12/2011 Posts: 236 Points: 686 Location: shetland
|
hi steve just ordered some of the same size thanks. I managed to find the two I lost, very lucky I have to admit. cheers for all your help rob
|
|
|
Rank: Super-Elite Groups: Registered
Joined: 30/01/2013 Posts: 4,604 Points: 13,607 Location: Monmouthshire UK
|
Will you be going for black deadeyes or natural? Steve
|
|
|
Rank: Pro Groups: Registered
Joined: 20/12/2011 Posts: 236 Points: 686 Location: shetland
|
Never thought about it really but I expect it should be black,will have to paint them I suppose . cheers rob
|
|
|
Rank: Super-Elite Groups: Registered
Joined: 30/01/2013 Posts: 4,604 Points: 13,607 Location: Monmouthshire UK
|
I only noticed on the off chance that the real ones are black so that's what I did. Make a little board with some inverted masking tape, stick them all down and spray them, then turn them over, easy!
|
|
|
Rank: Pro Groups: Registered
Joined: 20/12/2011 Posts: 236 Points: 686 Location: shetland
|
That`s what I like to hear as I sprayed the hull which came out ok as you say, easy. I will do that with the dead-eyes  thanks mate rob
|
|
|
Rank: Pro Groups: Registered
Joined: 20/12/2011 Posts: 236 Points: 686 Location: shetland
|
Hi Folks, back again,at last, just never had much chance on my boat over the last months. Scrounging for info again. Anyway, I am on 83. I am about to glue the acetate etc, It says to use clear glue as superglue is not suitable, could any shed light on this as this is my first build things just pop up for me to buy or ask etc. Which glue to use etc. just put the cannon port lids on as you can see,does not look too bad. thanks for any info. sandnesspeats attached the following image(s):
|
|
|
|
Guest (8)
|
US
