|
Rank: Pro Groups: Registered
Joined: 23/03/2010 Posts: 205 Points: 598 Location: West Midlands
|
At long last I think I have worked out how to insert my pictures. So here goes with my build diary to date. Like many of you I have returned to model building after many years and am finding it most enjoyable. My launch has been rebuilt several times and the planking repaired and filled more times than I care to admit but now am at the stage of fitting the internal boards and fittings.I will try to add pictures in my next update.
|
|
Rank: Pro Groups: Registered
Joined: 20/04/2010 Posts: 141 Points: 426 Location: Worthing, United Kingdom
|
Nice, looking forward to the pics!
|
|
Rank: Pro Groups: Registered
Joined: 23/03/2010 Posts: 205 Points: 598 Location: West Midlands
|
At long last the launch is taking shape and looking like it may be OK after all. I made a basic error in assuming that the "precision cut laser parts" would fit together without any modification required, I now know better. Having eventually sorting out the hull planking and oar slots, I fitted the floor boards, mesh inserts and thwarts. Now realize that I have not fitted the brass strip to the first and 5th thwart as I am awaiting delivery of the round nose pliers from eBay. I should have these by the weekend and will fit both in situ (I hope) As you can see I have started to paint the outside of the hull and again hope to complete this weekend. Then on to the windlass, transom supports, eyebolt and rudder. Painting the oars should not be too difficult but I am a little apprehensive regarding the mast, but we shall see. Below a selection of pictures of the build to date. Sorry if the pics are to big, still trying to sort out the best way to upload them. The paint finish looks awful but is not that bad in the flesh. Hi All, I have been busy building and here are the latest results of the main hull to date, the launch is also undergoing some rectification work and should be ready soon. Any comments welcome but nothing to harsh as it is my first attempt. Happy building to you all CMB[biggrin File Attachment(s): CMB attached the following image(s):
|
|
Rank: Pro Groups: New Members, Unapproved Joined: 24/08/2009 Posts: 48,827 Points: -13,348
|
welcome and a great start, keep 'em coming
|
|
Rank: Beginner Level 2 Groups: Registered
Joined: 22/03/2010 Posts: 10 Points: 30 Location: Stocksfield
|
How the hell do you get black paint to stick to the grills? I'm using the official goauch paints for the build but no luck, it just seeps thro and doesn't dry.
|
|
Rank: Pro Groups: Registered
Joined: 23/03/2010 Posts: 205 Points: 598 Location: West Midlands
|
Sundance wrote:How the hell do you get black paint to stick to the grills? I'm using the official goauch paints for the build but no luck, it just seeps thro and doesn't dry. I used acrylic grey metal primer thined down so as not to fill in the mesh and the brush was almost dry.It took 2/3 coats then applied the black paint from the Victory set, again the brush was almost dry and applied 2/3 coats.As a point of interest I added 3ml water to the bottle of black paint and this thined it down nicely, also used the same method to the white and ochre paint. Paint still dries very quickly. Hope this helps CMB
|
|
Rank: Vice-Master Groups: Registered
Joined: 13/10/2011 Posts: 851 Points: 2,628 Location: Leeds, Yorkshire
|
Which grey primer did you use and where did you get it from.? I assume that it wasn't a spray as you mentioned using brush.
Cheers
MikeT
|
|
Rank: Super-Elite Groups: Registered
Joined: 04/04/2010 Posts: 3,955 Points: 11,809 Location: uk
|
mike cornwall models do it in the admiral range metal primer that is. Current builds: SotS, USS Consitution, San Felipe, D51 loco, HMS Surprise, RB7, Arab Dhow, Jotika HMS Victory Completed builds: HMS Pickel, Thermopylae, Mississipi river boat, Mary Rose, Cutty Sark, San Francisco II, HMS Victory x5, Titanic Lifeboat, Panart HMS Victory Launch, Hachette Titanic, Virginia Schooner, Endeavour Longboat. http://www.model-space.com/gb/
|
|
Rank: Vice-Master Groups: Registered
Joined: 13/10/2011 Posts: 851 Points: 2,628 Location: Leeds, Yorkshire
|
Cheers Karl
I don't know how many times I've searched the Cornwall site and missed that one!!!
I feel an order coming on! -- trouble is it won't stop at the one item!
Mike T
|
|
Rank: Pro Groups: Registered
Joined: 23/03/2010 Posts: 205 Points: 598 Location: West Midlands
|
Mike Turpin wrote:Which grey primer did you use and where did you get it from.? I assume that it wasn't a spray as you mentioned using brush.
Cheers
MikeT I used PolyVine acrylic enamel paint purchased from Homebase. 50ml bottle cost £2.59.Ref.Number on bottle cap 47. A range of colours available
|
|
Rank: Pro Groups: Registered
Joined: 27/03/2010 Posts: 188 Points: 614 Location: Llandudno
|
Scull White & Chaos Black from Games Workshop are pretty spot on as primers. Stedders is the Paint God. Pray to him in the forum & he will light up your path. Bob
|
|
Rank: Amateur level 2 Groups: Registered
Joined: 21/03/2010 Posts: 49 Points: 149 Location: newcastle
|
I used the skull white from games workshop sprayed paint onto paper then used a brush to paint the mesh boards
|
|
Rank: Pro Groups: Registered
Joined: 23/03/2010 Posts: 205 Points: 598 Location: West Midlands
|
Hi All, I have been busy building and here are the latest results of the main hull to date, the launch is also undergoing some rectification work and should be ready soon. Any comments welcome but nothing to harsh as it is my first attempt. Happy building to you all CMB[biggrin CMB attached the following image(s):
|
|
Rank: Pro Groups: Registered
Joined: 23/03/2010 Posts: 205 Points: 598 Location: West Midlands
|
Help wanted. I am about to recommence my Victory build after some 6 months due to some serious surgery and appear to have mislaid/lost the black netting for making the hammock nets. Has anyone any spare netting, I am willing to pay postage ect. Regards CMB
|
|
Rank: Super-Elite Groups: Registered
Joined: 16/08/2010 Posts: 2,771 Points: 8,344 Location: Brighton
|
Hi CMB. Nice to see your back on your build. Look forward to seeing your progress Ian. Current builds.Hachettes build the bismark,HMS Victory, HMS Hood. Finished Builds Corel HMS Victory cross section.
|
|
|
Hi CMB, great to see you back again and hope all the medicals go well! If you have a market near you with any dressmaking shops or stalls check them out - you can buy very similar nylon netting by the yard for mere pennies. If you check out my DelPrado Victory diary you can see it in use. Note though, I mistakenly bought black without realising the real netting is natural rope, not tarred! If you can get a tan or light grey colour you can save having to paint it like me! Hope that helps Robin First wooden ship: The Grimsby 12 Gun 'Frigate' by Constructo Second: Bounty DelPrado Part Works Third: HMS Victory DelPrado Part Works 1/100 scale Diorama of the Battle of the Brandywine from the American Revolutionary War Diorama of the Battle of New Falkland (unfinished sci-fi), Great War Centenary Diorama of the Messines Ridge Assault Index for the Victory diary is on page 1
|
|
Rank: Pro Groups: Registered
Joined: 23/03/2010 Posts: 205 Points: 598 Location: West Midlands
|
Hi Robin, Thanks for you good wishes. Many thanks for the tip. Will visit local store over the weekend and have a look. Cheers CMB
|
|
Rank: Pro Groups: Registered
Joined: 23/03/2010 Posts: 205 Points: 598 Location: West Midlands
|
ian smith wrote:Hi CMB. Nice to see your back on your build. Look forward to seeing your progress Ian. Hi Ian, New pictures will be posted soon. Regards CMB
|
|
Rank: Master Groups: Registered
Joined: 30/03/2011 Posts: 1,344 Points: 4,079 Location: Bryanston, Johannesburg. RSA
|
Hello CMB. welcome back to the fold. Looking forward to seeing some more of your pics. Rgds, Hans "It's okay to make mistakes. mistakes are our teachers - they help us to to learn, even if it is painfully" Current Build: Endeavour Cross section,D51 Completed: HMS Victory Under the bench: Endeavour x 2,Sovereign of the Seas, Akagi and The Black Pearl!HMS Victory Cross Section
|
|
Rank: Master Groups: Registered
Joined: 29/03/2011 Posts: 1,053 Points: 3,165 Location: Glenvista JHB
|
Hi CMB, Welcome back. Glad to hear that you are on the mend. Looking forward to following your progress. Kind regards, Garth "Measure twice, cut once!!!" Finished!!! HMS Victory, Current build: Black Pearl. On hold: Bismarck, Golden Hind, Flying Scotsman, Victory Cross Section, SOTS, Tiger 1. Wish list: USS Constitution.
|
|
Guest (2)
|