When ever it comes to the builds, I always uses Tomicks build diary

They tend to be more detailed than the mag, also highlights if there is a mistake in the publication

hope this answers your question

Tomicks Diary

As above I would consult Mr Ts build and have a look at some other build diaries. If it is still not clear put the spares to one side and wait for your next delivery just incase they are to be used in the next issue, as that sometimes happens.

Hi, I know this thread had its last post about a year ago, but I've just had the same problem. I am sure there are mistakes in the instructions- in issue 43 I went with the black type C screws, even though as the OP says, the picture shows a silver screw. Issue 44 is even more confusing- it says that 18 type C screws are provided, which indeed they are. And in stage 4 it says to use the type C to attach the side protector mount, however I found these to be much too small, and they just span in the hole. I used type E instead- which it what it then says to use 6 of to attach the underbody connectors and cockpit base. However, I had nowhere near enough type E left, despite carefully storing all the screws since the beginning. So I used type Cs, which worked fine. And to compound the confusion, at the end of the stage it says to store the remaining screws carefully, showing 12 remaining of the original 18, indicating that indeed 6 have been used- even though it says throughout to use type E and the screws provided were apparently type C....confused??? I certainly was .....but it all went together eventually after a degree of head scratching and experimentation.

Thanks Warty!! Better late than never!!