|
|
 Rank: Beginner Level 1  Groups: Registered
Joined: 08/10/2013 Posts: 9 Points: 27 Location: NORTH EAST
|
Hi every one ,
I'm at the stage of assembling the bowsprit at issue 113 and have hit a snag as follows:
The mast part 1b has been made to the dimensions 4mm at one end and 3mm at the top
As per the drawing supplied .
The parts 173 that is the caps that fit have a 4 mm hole which is way too big to assemble it
Has anyone else had this problem or have I done something wrong
Regards sgrich
|
|
|
|
|
sgrich wrote:Hi every one ,
I'm at the stage of assembling the bowsprit at issue 113 and have hit a snag as follows:
The mast part 1b has been made to the dimensions 4mm at one end and 3mm at the top
As per the drawing supplied .
The parts 173 that is the caps that fit have a 4 mm hole which is way too big to assemble it
Has anyone else had this problem or have I done something wrong
Regards sgrich Hi SG, don't think you have done anything wrong here as I found the same problem with this part and solved it by using slivers of Sapele strips in the cap hole to give me a snug fit.... Look at this page of my build and you will see I referred to the problem here... http://forum.model-space...ts&t=5013&p=152
Hope this helps.. Alan
|
|
|
Rank: Beginner Level 1 Groups: Registered
Joined: 08/10/2013 Posts: 9 Points: 27 Location: NORTH EAST
|
Thanks Alan for your help
I'm gonna make some plugs and after glueing them in will re drill the holes , marvellous what a nights kip can do
Cheers
Sgrich
|
|
|
|
|
sgrich wrote:Thanks Alan for your help
I'm gonna make some plugs and after glueing them in will re drill the holes , marvellous what a nights kip can do
Cheers
Sgrich Happy I was able to help SG, good luck with the rest of your build....  Regards Alan
|
|
|
|
Guest
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
