|
|
 Rank: Vice-Master   Groups: Registered
Joined: 05/03/2015 Posts: 561 Points: 1,713 Location: South Carolina
|
A few years ago I posed the exact same question on another forum and came up with a magnificent list of models we all would like to see be addresses in kit form in one form or another. Here's a short list:
1. Alexi Leonav from 2010
2. Johnny 5 from Short Circuit
3. The Gunstar from The Last Starfighter
4. Project Crossbow from Real Genius
5. The Robot and the Zorgon Ship from Zathura
6. Chromed Naboo Ships from SW:Episode 1
7. Valley Forge and Heuy and Duey from Silent Running
8. Event Horizon ship
9. Whispercraft from 6th Day
10. Any of the craft from Minority Report
11. Blockade Runner from Star Wars:Episode IV
12. Any ship or droid in the Star Wars movies that was on the screen for more then 3 seconds. (The rest of the pod racers, the speeders, the cars that Obi-wan and Anakin were in while chasing the bad guys on Corusant, the Probe Droid, the Diner Waitress bot, Sandcrawler, T-16 Skyhopper, full size versions of those stupid little snap together kits that were prepainted, the Trade Federation command ships, the list goes on and on)
13. The ships from Galaxy Quest
14. The classic Dune movie ships (All of them but mainly the Sandcrawler and the Carry-all)**** This is my one favorite I'd love to see!
All of these would have to be a good size... the little 8 inch kits wouldn't cut it. Should all be studio scale or at least something that could be proudly displayed and not look like a toy. There's a bunch more but I think any and all of these would be a big hit and allow you to expand your sci-fi genre to new levels. But the Falcon was the perfect start to begin with!
|
|
|
 Rank: Super-Elite    Groups: Registered
Joined: 17/12/2013 Posts: 3,982 Points: 11,974 Location: NY, USA
|
JIm you can get kits of the blockade runner, sandcrawler and probe droid in resin.
Randy cooper sells the runner and sandcrawler and Nicenmodels sells the probe droid
Carl
|
|
|
 Rank: Amateur level 2 Groups: Registered
Joined: 05/02/2015 Posts: 46 Points: 141 Location: Perth, Australia
|
The Alexi Leonov from 2010 would be awesome... and also leads me to think of the ships from Babylon 5.. as the Earth destroyers were based on the Leonov...
The gunstar from last starfighter would also be cool..
|
|
|
Rank: Vice-Master Groups: Registered
Joined: 05/03/2015 Posts: 561 Points: 1,713 Location: South Carolina
|
darbyvet wrote:JIm you can get kits of the blockade runner, sandcrawler and probe droid in resin.
Randy cooper sells the runner and sandcrawler and Nicenmodels sells the probe droid
Carl And of course all are resin garage kits. I'm talking full studio scale replicas here. I think DeAgostini's next sci-fi kit should be a studio scale AT-AT or AT-ST. Both of those would be incredible to have in my collection... or even a studio scale Snowspeeder. I know that there are a couple of guys on the RPF forums that have figured out the mechanisms for the leg pistons that look like the actual thing... that would be an awesome kit to part pack out.
|
|
|
Rank: Super-Elite Groups: Registered
Joined: 17/12/2013 Posts: 3,982 Points: 11,974 Location: NY, USA
|
LrdSatyr8 wrote:darbyvet wrote:JIm you can get kits of the blockade runner, sandcrawler and probe droid in resin.
Randy cooper sells the runner and sandcrawler and Nicenmodels sells the probe droid
Carl And of course all are resin garage kits. I'm talking full studio scale replicas here. I think DeAgostini's next sci-fi kit should be a studio scale AT-AT or AT-ST. Both of those would be incredible to have in my collection... or even a studio scale Snowspeeder. I know that there are a couple of guys on the RPF forums that have figured out the mechanisms for the leg pistons that look like the actual thing... that would be an awesome kit to part pack out. You may be onto something there Jim How about a diorama with an AT AT and a snowspeeder on a snowy base.Kind of like the master replicas one. A studio scale snowspeeder would be good too.I have Steve Neisens SS snowspeeder and it is an impressive size. I have both the AT AT and AT ST in studio scale resin kits, but they have resin legs.It would be awesome to make them with functioning metal legs. Carl
|
|
|
Rank: Vice-Master Groups: Registered
Joined: 05/03/2015 Posts: 561 Points: 1,713 Location: South Carolina
|
darbyvet wrote:You may be onto something there Jim
How about a diorama with an AT AT and a snowspeeder on a snowy base.Kind of like the master replicas one.
A studio scale snowspeeder would be good too.I have Steve Neisens SS snowspeeder and it is an impressive size.
I have both the AT AT and AT ST in studio scale resin kits, but they have resin legs.It would be awesome to make them with functioning metal legs. Oh yeah baby... make the legs like they did in the studio and all the bits and bobs would move for stop-motion filming... that would be awesome!! You'd be able to pose them any way you wanted... maybe throw in a to scale snowspeeder for the AT-AT that would be able to be placed anywhere you wanted. I actually did a AT-AT that I modified and accurized from an old MPC kit a long time ago complete with a to scale snowspeed flying around it's legs. Sold it awhile back... Here's a few of the models I've built over the years: (I guess the IMG feature is turned off in the the forums here) LrdSatyr8 attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Registered
Joined: 17/12/2013 Posts: 3,982 Points: 11,974 Location: NY, USA
|
Wow super models Jims
I love the Deathstar especially
Carl
|
|
|
|
|
 Some very nice stuff there  Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .
|
|
|
|
|
LrdSatyr8 wrote:A few years ago I posed the exact same question on another forum and came up with a magnificent list of models we all would like to see be addresses in kit form in one form or another. Here's a short list:
1. Alexi Leonav from 2010
2. Johnny 5 from Short Circuit
3. The Gunstar from The Last Starfighter
4. Project Crossbow from Real Genius
5. The Robot and the Zorgon Ship from Zathura
6. Chromed Naboo Ships from SW:Episode 1
7. Valley Forge and Heuy and Duey from Silent Running
8. Event Horizon ship
9. Whispercraft from 6th Day
10. Any of the craft from Minority Report
11. Blockade Runner from Star Wars:Episode IV
12. Any ship or droid in the Star Wars movies that was on the screen for more then 3 seconds. (The rest of the pod racers, the speeders, the cars that Obi-wan and Anakin were in while chasing the bad guys on Corusant, the Probe Droid, the Diner Waitress bot, Sandcrawler, T-16 Skyhopper, full size versions of those stupid little snap together kits that were prepainted, the Trade Federation command ships, the list goes on and on)
13. The ships from Galaxy Quest
14. The classic Dune movie ships (All of them but mainly the Sandcrawler and the Carry-all)**** This is my one favorite I'd love to see!
All of these would have to be a good size... the little 8 inch kits wouldn't cut it. Should all be studio scale or at least something that could be proudly displayed and not look like a toy. There's a bunch more but I think any and all of these would be a big hit and allow you to expand your sci-fi genre to new levels. But the Falcon was the perfect start to begin with! Oh and... The Liberator - Blakes 7 Eagle Transporter - Space 1999 Dr Zarkofs rocket ship - Flash Gorden Klingon Bird of prey - Star Treck Colonial Viper - Classic Battle Star Galactica Thunder Fighter - Buck Rodges The Drop Ship - Aliens Repair Man's ship - Oblivion Nazi Flying Saucer - Iron Sky Jase “Whenever you find yourself on the side of the majority, it is time to pause and reflect.”
-Mark Twain
|
|
|
Rank: Super-Elite  Groups: Registered
Joined: 27/01/2014 Posts: 5,060 Points: 14,980
|
I'm a big fan of the Star Gate Daedulus Class Star Ship. That would be cool
|
|
|
Rank: Vice-Master Groups: Registered
Joined: 05/03/2015 Posts: 561 Points: 1,713 Location: South Carolina
|
davetwin wrote:I'm a big fan of the Star Gate Daedulus Class Star Ship. That would be cool Oh I like that idea... very cool ship
|
|
|
Rank: Vice-Master Groups: Registered
Joined: 05/03/2015 Posts: 561 Points: 1,713 Location: South Carolina
|
I just thought of an awesome new idea for a kit.. I've only seen one other kit of it in my lifetime and it was small and more of a toy. I'm talking about a 1:6 scale Chitty Chitty Bang Bang! Can you imagine how popular that would be from a company like DeAgostini? I know they would make it an exact replica... but I also know they'd put all the bells and whistles into it as well. Like the pop-out wings, the pop-up rotor blades, and maybe even an inflatable rubber raft! That is probably one of the most recognizable vehicles ever built, probably one of the first and seeing as this company is so good at vehicles, I know they would do it right! And if they had Dick Van Dyke's approval, it would be an incredible collectible that would be very sought after! So what do you all think?
|
|
|
Rank: Vice-Master Groups: Registered
Joined: 05/03/2015 Posts: 561 Points: 1,713 Location: South Carolina
|
How about an H.G. Wells Time Machine... with all the lights and sound and the spinning wheels... that would be awesome! And make it to where it wouldn't work without the key and when you push the key forward it speeds up and back slows it down!
|
|
|
|
|
LrdSatyr8 wrote:I just thought of an awesome new idea for a kit.. I've only seen one other kit of it in my lifetime and it was small and more of a toy. I'm talking about a 1:6 scale Chitty Chitty Bang Bang! Can you imagine how popular that would be from a company like DeAgostini? I know they would make it an exact replica... but I also know they'd put all the bells and whistles into it as well. Like the pop-out wings, the pop-up rotor blades, and maybe even an inflatable rubber raft! That is probably one of the most recognizable vehicles ever built, probably one of the first and seeing as this company is so good at vehicles, I know they would do it right! And if they had dancer Van Dyke's approval, it would be an incredible collectible that would be very sought after! So what do you all think? This is the only production kit of Chitty ever made to my knowledge, so yes i agree http://forum.model-space...s&m=93325#post93325
Jase “Whenever you find yourself on the side of the majority, it is time to pause and reflect.”
-Mark Twain
|
|
|
 Rank: Semi-Pro Level 1  Groups: Registered
Joined: 29/03/2015 Posts: 52 Points: 142 Location: Granbury, Texas
|
darbyvet wrote:JIm you can get kits of the blockade runner, sandcrawler and probe droid in resin.
Randy cooper sells the runner and sandcrawler and Nicenmodels sells the probe droid
Carl Carl is right. Randy cooper makes some nice kits. I have his Blockade Runner, and it is a HUGE model. Not built yet though lol. You can also get a 1/350 scale Blockade Runner from Blue Moon. He sells his models through Starship Modeler here. He also sells under JPG Castings at Starship Modeler also, here.He also has a studio scale TIE Bomber that is out of this world.
|
|
|
Rank: Super-Elite Groups: Registered
Joined: 17/12/2013 Posts: 3,982 Points: 11,974 Location: NY, USA
|
LrdSatyr8 wrote:How about an H.G. Wells Time Machine... with all the lights and sound and the spinning wheels... that would be awesome! And make it to where it wouldn't work without the key and when you push the key forward it speeds up and back slows it down! masterpiece models makes this and has the upgrade kit with lighting and spinning disc.It is pretty pricey with the upgrade set though Carl PS they also make the 2002 time machine kit.I have that and it is incredible
|
|
|
Rank: Vice-Master Groups: Registered
Joined: 05/03/2015 Posts: 561 Points: 1,713 Location: South Carolina
|
I realize that there are other garage kits out there... but then again, look at how many versions of the Falcon there are as well. I think getting the parts work and the attention to detail DeAgostini would put into the kits, they would turn out looking incredible!
|
|
|
|
Guest (4)
|
US
