|
|
 Rank: Semi-Pro Level 2  Groups: Registered
Joined: 02/03/2015 Posts: 84 Points: 245 Location: England
|
Just assembling the front wing and having a nightmare with it. So far, 5 rounded off screws which no longer turn. Am I missing something? Feel like it should be very easy. Building the MP4/4!
|
|
|
 Rank: Pro    Groups: Registered
Joined: 27/06/2011 Posts: 434 Points: 1,309 Location: milton keynes
|
hi phil try dipping the tip of the screw into washing up liquid before screwing in, it will help the screw cut into the plastic regards Dan Built - MP4/23, Zero, Deagostini Falcon, Model Airways 1903 Wright Flyer, Senna Mp4/4.
Working - Mclaren M23 1/8th scale to complement the Deagostini MP4/23 & Mp4/4
on the bench, Model Airways Sopwith Camel.
|
|
|
Rank: Semi-Pro Level 2 Groups: Registered
Joined: 02/03/2015 Posts: 84 Points: 245 Location: England
|
Thanks for the tip Dan, will try that the next time a screw is required!  Building the MP4/4!
|
|
|
 Rank: Beginner Level 3 Groups: Registered
Joined: 17/07/2011 Posts: 26 Points: 93 Location: Northampton
|
What screwdriver did you use? I found the supplied one doesn't fit the screw heads well, hence I would think, your rounding problem. I use a specialist set of miniature screwdrivers and test before trying them on the precious model...
|
|
|
Rank: Semi-Pro Level 2 Groups: Registered
Joined: 02/03/2015 Posts: 84 Points: 245 Location: England
|
Yes, I used the one provided with the kit, it seemed ok, maybe I will pick up an alternative and try the wax/washing up liquid method on the screws. Thanks for all the advice everyone! Building the MP4/4!
|
|
|
Rank: Semi-Pro Level 2 Groups: Registered
Joined: 02/03/2015 Posts: 84 Points: 245 Location: England
|
Ok so looking for an alternative but not entirely 100% on the size screwdriver I need, the guide in issue 2 says the screws are 1mm width? So do I need a 1mm cross screwdriver?  Building the MP4/4!
|
|
|
|
|
 Hi Phil This is the set I bought off flea-bay works ok for me and they have magnetic tips.Any good precision screwdriver set will do the job. http://www.ebay.co.uk/it...amp;hash=item58ae56b726
Hope this helps, Regards Andy Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .
|
|
|
 Rank: Vice-Master  Groups: Registered
Joined: 20/04/2010 Posts: 545 Points: 1,536 Location: lossiemouth
|
the trouble with x crosshead screws is no one says Philips is 60deg and pozie is 50deg angle and don't mix and a hard pointed screwdriver will take the edge of a screw if the wrong one is used, a dear screwdriver with a hard head sounds great but over tighten a screw and it will take of the the corners off and round the head, and use cheap screwdriver and you will damage the driver if you over tighten, I rather buy the cheap ones and save the screw
|
|
|
Rank: Pro Groups: Registered
Joined: 27/06/2011 Posts: 434 Points: 1,309 Location: milton keynes
|
Andy stop pointing out these great things, makes me spend money  regards dan Built - MP4/23, Zero, Deagostini Falcon, Model Airways 1903 Wright Flyer, Senna Mp4/4.
Working - Mclaren M23 1/8th scale to complement the Deagostini MP4/23 & Mp4/4
on the bench, Model Airways Sopwith Camel.
|
|
|
|
|
Glad to be of service Dan, another screw driver that comes in handy was the one provided with the Zero. Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .
|
|
|
Rank: Semi-Pro Level 2 Groups: Registered
Joined: 02/03/2015 Posts: 84 Points: 245 Location: England
|
Excellent, will order this forthwith. Building the MP4/4!
|
|
|
|
Guest (4)
|
US
