|
Rank: Newbie Groups: Registered
Joined: 10/01/2016 Posts: 2 Points: 6 Location: Calgary, AB, Canada
|
I am up to issue 28 and was just about to start putting together the hull frame sections as per the instructions in issue 24. I got all the pieces gathered up and noticed that I only have 8 2-hole connectors, and I'm supposed to have 9 of them. I've searched everywhere for another 2-hole connector but I think there's a reasonable chance it got lost somewhere. I'm usually very careful about storing and verifying all the pieces but somehow this one slipped by.
So my questions are:
1) Will we ever get any spare 2-hole connectors in future issues that I might be able to use?
2) Can I get a spare 2-hole connector sent to me or do I have to order a complete issue that contains one?
So frustrating that such a small piece has put my build at a stand-still.
Any suggestions/advice is most welcome.
Thanks, Tom
|
|
Rank: Semi-Pro Level 2 Groups: Registered
Joined: 02/06/2015 Posts: 82 Points: 237
|
That might actually be a misprint. I'm pretty sure you'll only need 8, even though the instructions say 9.
|
|
Rank: Super-Elite Groups: Registered
Joined: 17/12/2013 Posts: 3,982 Points: 11,974 Location: NY, USA
|
WapCaplet wrote:I am up to issue 28 and was just about to start putting together the hull frame sections as per the instructions in issue 24. I got all the pieces gathered up and noticed that I only have 8 2-hole connectors, and I'm supposed to have 9 of them. I've searched everywhere for another 2-hole connector but I think there's a reasonable chance it got lost somewhere. I'm usually very careful about storing and verifying all the pieces but somehow this one slipped by.
So my questions are:
1) Will we ever get any spare 2-hole connectors in future issues that I might be able to use?
2) Can I get a spare 2-hole connector sent to me or do I have to order a complete issue that contains one?
So frustrating that such a small piece has put my build at a stand-still.
Any suggestions/advice is most welcome.
Thanks, Tom Hi Tom, I am forum support for USA/Canada.PM me if you need that 9th connector and I will help you get a replacement. Carl
|
|
Rank: Newbie Groups: Registered
Joined: 10/01/2016 Posts: 2 Points: 6 Location: Calgary, AB, Canada
|
I decided to go ahead and try building what I could from the instructions in Issue 24. I managed to get it all built without any problem. Woohoo! Thanks BradM73 for the verification on the misprint.
And thank you Carl for your offer of help. Looks like I have all the parts I need after all.
Cheers, Tom
|
|
Guest (3)
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.