|
|
looking great Malc Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .
|
|
|
Pack 12 arrived on Schedule RM1 attached the following image(s):
|
|
|
I've used a black wash on the radiator and added a hose joint to the pipe. The moulded clamps were filed off and I used a blue heat shrink sleeve ( plus my wifes hairdryer ) together with PE hose clamps. A bit fiddly but I like the result. Malc.RM1 attached the following image(s):
|
|
|
Similar treatment on the pipe between the top and bottom of the intercooler. Black heat shrink and PE clamps.RM1 attached the following image(s):
|
|
|
I've seen that Dan on the UK forum has got some great ideas for some extra detail and i'm going to give some of them a go.(if my skills permit ). Using the supplied plastic part as a template I cut a mesh piece and punched a hole through. A cut-down eyelet was glued on to clean up the hole. Not a very visible part of the final model but I'm pleased with the detail.
RM1 attached the following image(s):
|
|
|
Starting to take shape I don't know why the monocoque looks so grey in the picture. it must be the camera flash giving that effect. RM1 attached the following image(s):
|
|
|
Looking good Malc Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .
|
|
|
Finished the mesh in the intakes with a strip of 0.5mm thick plastic sprayed silver.Maybe not quite to scale but i'm happy with the appearance.RM1 attached the following image(s):
|
|
|
Trial assembly of the intercooler radiator.RM1 attached the following image(s):
|
|
|
Pack 13 arrived RM1 attached the following image(s):
|
|
Rank: Super-Elite Groups: Registered
Joined: 27/01/2014 Posts: 5,060 Points: 14,980
|
Just caught up Malc, lovely work and love the little extras you are doing too
|
|
|
Some nice mods there Malc looking good Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .
|
|
|
|
|
Rank: Super-Elite Groups: Registered
Joined: 17/12/2013 Posts: 3,982 Points: 11,974 Location: NY, USA
|
Looks great.Loving the modifications.
Carl
|
|
Rank: Pro Groups: Registered
Joined: 08/02/2015 Posts: 274 Points: 812 Location: Malmesbury
|
Looking great , loving the use of heat shrink for rubber hoses would never have thought of that keep up the great work. Regards Shaun Building-RC spitfire Build- titanic,Skyrider drone, solar system, T72 tank
|
|
Rank: Beginner Level 2 Groups: Registered
Joined: 14/03/2010 Posts: 10 Points: 20 Location: Johannesburg
|
Well done on your improvements they look great! How are you getting your deliveries that you have received number 13? I subscribed when the build first appeared and haven't had a delivery this whole year so far - I'm only upto issue 8. When I call them they tell me they don't have any stock????
|
|
|
Sorry to hear that Grant. My deliveries have been very good. I've sent you a PM. Malc.
|
|
|
This weeks work was the front dampers. I inked them as suggested in the instructions and replaced the screw "L" with a brass 1.4 x 8mm bolt from scale hardware. RM1 attached the following image(s):
|
|
|
I couldn't resist some carbon detail in the cockpit.RM1 attached the following image(s):
|
|
Rank: Super-Elite Groups: Registered
Joined: 16/08/2010 Posts: 2,771 Points: 8,344 Location: Brighton
|
Looking a very nice build. keep the pictures coming. Regards Ian. Current builds.Hachettes build the bismark,HMS Victory, HMS Hood. Finished Builds Corel HMS Victory cross section.
|
|
Guest (5)
|