|
|
 Rank: Beginner Level 3 Groups: Registered
Joined: 05/09/2015 Posts: 26 Points: 51
|
OK, all I can get out of the changer is, to get led 2 flash?
I have left it for hours and still, it only flashes led 2
Roger
|
|
|
 Rank: Vice-Master    Groups: Registered
Joined: 05/04/2013 Posts: 540 Points: 1,630 Location: England
|
Do you mean the cell 2 led? What color is the main led? Have you pluged both the deans connector and the balance connector into the charger? Finished 3D Printer, RB7, Hummer, Skyrider drone & Combat tank collection http://www.model-space.com/gb/
|
|
|
Rank: Beginner Level 3 Groups: Registered
Joined: 05/09/2015 Posts: 26 Points: 51
|
|
|
|
Rank: Vice-Master Groups: Registered
Joined: 05/04/2013 Posts: 540 Points: 1,630 Location: England
|
How long has it been. If cell 1 and 3 are constant read and 2 is flashing it means it's balancing. Are all other LEDs off? Finished 3D Printer, RB7, Hummer, Skyrider drone & Combat tank collection http://www.model-space.com/gb/
|
|
|
Rank: Beginner Level 3 Groups: Registered
Joined: 05/09/2015 Posts: 26 Points: 51
|
I get all red when plug in mains in to the changer
then it goes to green flashing
plug in +/- cable and still have green flashing
Then plug in the 4 way cable into the middle socket on the side and it goes to just the cell 2 led flashing, and all other leds out.
unplug it and the changer goes to the green flash.
just plugging in the 4 way cable it goes to just cell 2 led flashing only
|
|
|
Rank: Vice-Master Groups: Registered
Joined: 05/04/2013 Posts: 540 Points: 1,630 Location: England
|
Hi I just thought it might help if I take note of what happens to my charger when I plug it in. If I plug the white balance connector in first then led 2 flashes just as you describe. As soon as I plug the deans connector in the leds show that it is charging (all leds red).  Perhaps it is not detecting the +/- connection? Finished 3D Printer, RB7, Hummer, Skyrider drone & Combat tank collection http://www.model-space.com/gb/
|
|
|
Rank: Beginner Level 3 Groups: Registered
Joined: 05/09/2015 Posts: 26 Points: 51
|
I 99% sure it is the right way around 
|
|
|
Rank: Vice-Master Groups: Registered
Joined: 05/04/2013 Posts: 540 Points: 1,630 Location: England
|
All looks good to me. Finished 3D Printer, RB7, Hummer, Skyrider drone & Combat tank collection http://www.model-space.com/gb/
|
|
|
 Rank: Pro Groups: Joined: 24/08/2009 Posts: 48,827 Points: -13,348
|
|
|
|
Rank: Vice-Master Groups: Registered
Joined: 05/04/2013 Posts: 540 Points: 1,630 Location: England
|
Looking at the error code for cell 2 flashing it says wrong connection. Not the most specific error. Finished 3D Printer, RB7, Hummer, Skyrider drone & Combat tank collection http://www.model-space.com/gb/
|
|
|
Rank: Beginner Level 3 Groups: Registered
Joined: 05/09/2015 Posts: 26 Points: 51
|
I would say it was error 2, but the change led is not on.
if it was error 2 want can I do about it?
|
|
|
Rank: Pro Groups: Joined: 24/08/2009 Posts: 48,827 Points: -13,348
|
Both items are supplied together, ask for a replacement
|
|
|
|
Guest (2)
|
US
