|
|
 Rank: Pro Groups: Joined: 24/08/2009 Posts: 48,051 Points: -13,308
|
As noted in the instructions of Pack 12 at Stage 30 - for the operation of the RC system on the chassis, you will need a rechargeable 6-volt 1600mAh 2/3A Ni-Cd or Ni-MH (Nickel-Metal Hydride or Nickel Cadmium) “in-line” receiver battery pack with JST (BEC) male plug to suit the JST female socket of the on/off Switch harness.
You will also require a compatible Charger and should ensure that your chosen battery pack is of a suitable size to fit into the battery box on the chassis.
These items are available as a complete set (battery pack & charger) via the ModelSpace online shop:
http://www.model-space.c...-smart-charger-kit.html
Specifications:
Extreme Power rechargeable 6-volt 1600mAh 2/3A five cell Ni-MH battery pack. Includes a JST (BEC) adaptor lead for connection to the charger.
Intelligent 500mA smart charger:
The Smart Charger is designed to charge Nickel-Metal Hydride or Nickel Cadmium ( Ni-Cd or Ni-MH) 4-10 cell battery packs. The Smart Charger has a microprocessor-control system which can distinguish a 4~10 cell pack automatically and cut-off the charging accordingly, manual-adjustment is not needed.
Cell life is protected by –dV detection and timer protection.
LED display for Rapid charge/trickle charge
Red LED- rapid charge
Green LED- Fully Charged & trickle charge
Flash Red and Green LED- short
Flash Red LED: Reverse polarity or Wrong Battery
Safety features: -dV cut-off function
Note - The charger has a UK 3-pin plug and is rated at 220/240volt input.
Tomick attached the following image(s):
|
|
|
|
Guest
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
