|
|
Hi Jase and Karl Thanks for looking in and your comments regards Andy Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .
|
|
Rank: Beginner Level 1 Groups: Registered
Joined: 08/08/2013 Posts: 9 Points: 60 Location: Sydney
|
arpurchase wrote: Hi Jase and Karl Thanks for looking in and your comments regards Andy Thanks Andy for the build diary!!!! YEAH!!!
|
|
|
Hi Wilbur your welcome hope it helps, Andy Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .
|
|
|
Hi All After a wait for some instructions to be translated I can now continue with the build on the engine and this comprises the assembly of the cooling gills. Remove all the parts from the sprue's but leave the parts that are attached to the triangular sprue's [ see pic's] as these are not needed as they are already moulded into the engine casing. Use a file to remove the burs from the sprue but be carefull here as the outer parts are soft aluminium and the hinge parts are made of steel. Now degrease the parts . Then place the outers in the positions shown in the instructions so you have left and right outers with the corresponding hinge parts and glue together with super glue or epoxy. Once dry the parts are ready for painting with undercoat or clear laquer More soon Andy arpurchase attached the following image(s): Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .
|
|
|
Hi All After the assembly of the cooling flaps they were undercoated and then the insides given a coat of matt weathered black and the outside surfaces given a coat of semi gloss black. After being left overnight to dry off properly the eight cooling flaps were fitted four to each side, a word of warning here they are a tight fit on the moulded lugs and some manipulation is needed to get them to fit. After the cooling flaps are fitted then the muffler shrouds are fitted making sure there is clearance so the flaps can open and close without fouling them. The fitting of the above brings this diary to a close and that it has given some idea's on how to get your Sakae Engine built regards Andy arpurchase attached the following image(s): Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .
|
|
Rank: Pro Groups: Registered
Joined: 27/06/2011 Posts: 434 Points: 1,309 Location: milton keynes
|
looks great Andy Nice work dan Built - MP4/23, Zero, Deagostini Falcon, Model Airways 1903 Wright Flyer, Senna Mp4/4. Working - Mclaren M23 1/8th scale to complement the Deagostini MP4/23 & Mp4/4 on the bench, Model Airways Sopwith Camel.
|
|
|
Hi Dan Thanks for looking in and your comments regards Andy Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .
|
|
Rank: Super-Elite Groups: Registered
Joined: 16/08/2010 Posts: 2,771 Points: 8,344 Location: Brighton
|
Hi Andy. Looks great. Ian Current builds.Hachettes build the bismark,HMS Victory, HMS Hood. Finished Builds Corel HMS Victory cross section.
|
|
Guest
|