|
|
This build will be a straight out of the box build and will follow the instructions closely, as found on the MS Website: http://www.model-space.c...yette-complete-kit.html
A review of the kit has been done separately and can be found here: http://forum.model-space...spx?g=posts&t=22587
It should also be noted that should you wish to create the mouldings on the various strips of wood on this build then you will need both the sets of Artesania Microshapers. This is an optional extra and is recommended in Stage 17 of the build instructions. (Artesania Ref 27300 and 27301). http://forum.model-space...spx?g=posts&t=22529
When these become available from the tools webpage then members will be advised however, they are available via other online sources such as Tower Hobbies... http://www3.towerhobbies.../wti0001p?&I=LXGEGH
http://www3.towerhobbies.../wti0001p?&I=LNGEGJ
Stage 1 Removed the two parts of the keel, 10 ribs, stiffeners and 3 mast sockets from the fret. Cleaned all edges and slots of any ash deposits. Glued the two parts of the keel together and clamped to a flat surface to ensure the keel remained flat. Once the glue had dried, glued and clamped two stiffeners over the joint, ensuring the slots on the keel were kept free. Allowed to dry fully before continuing. Set the keel into a jig to keep it straight. Starting at the bow, glued the frames into position ensuring they were set to 90 degrees to the keel and perfectly upright and level. To do this I used the set squares included in Artesania’s Micro Drawing Set which can be purchased separately from the Model-space Shop in the very near future. Once all the frames were set these were left to dry fully before continuing. The three mast sockets have two different sizes for the mast bases. The two with the larger sockets were glued in place for the Foremast and Mainmast, the smaller for the Mizzen mast. Finally, glued the two supporting pieces into the slots (facing the bow), ensuring they were placed the right way round. This completes Stage 1. Regards Alan Gandale attached the following image(s):
|
|
|
Nice start Alan looking forward to this one Rgd Martyn Building ? Completed. Soliei Royal . Sovereign of the Seas . Virginia . Scotland . San Felipe . Corel vasa , Santisima Trinadad X section , Vasa Next Build ? When sailors have good wine, They think themselves in heaven for the time. John Baltharpe
|
|
|
Thanks Martyn, I think she's a lovely ship and so far everything is fitting very nicely.... .. Early days of course but so far am impressed with this kit.... Regards Alan
|
|
|
yeah I might have to look at this one for my stash Rgd Martyn Building ? Completed. Soliei Royal . Sovereign of the Seas . Virginia . Scotland . San Felipe . Corel vasa , Santisima Trinadad X section , Vasa Next Build ? When sailors have good wine, They think themselves in heaven for the time. John Baltharpe
|
|
Rank: Vice-Master Groups: Registered
Joined: 09/12/2013 Posts: 577 Points: 1,748 Location: smethwick england
|
Looks like a nice kit,not too big and good quality.Very tempted. Man he took his time in the sun Had a dream to understand A single grain of sand He gave birth to poetry But one day will cease to be Greet the last light of the library...We were here!
|
|
|
Nice start Alan Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .
|
|
Rank: Elite Groups: Registered
Joined: 20/04/2012 Posts: 1,787 Points: 5,292 Location: Thurso
|
Great start Alan, she looks a nice quality kit.
Graeme
|
|
|
Thanks everyone for looking in. I'd say this is a kit worth doing, hasn't given me any problems at all as yet..... .. Don't think you'd be disappointed... Regards Alan
|
|
Rank: Pro Groups: Registered
Joined: 18/08/2015 Posts: 294 Points: 897 Location: Amesbury, Wiltshire
|
Hi Alan Nice and straight tidy work looking forward to watching this build progress Rgds Tery FINISHED BUILDS---- HMS Victory--Bismarck--Battleship Yamato-D51 Steam Train--Pocher Ferrari Testarossa--Soleil Royal--Schnellboot S-100--StageCoach 1848--HMS HOOD-- Delorean (Back to the Future)
|
|
Rank: Super-Elite Groups: Registered
Joined: 20/10/2016 Posts: 4,504 Points: 13,548 Location: Wiltshire
|
Very nice looking kit. Looking forward to seeing this take shape. Regards, Phil W Completed projects: 1/43 scale Bedford HA van / 1/43 scale MG TD sports car Current projects: 1/48 scale U-boat [U230] Future projects: 1/148 scale railway diorama / 1/50 scale R/C Volvo F89 logging truck / 1/148 scale Thunderbirds Fireflash
|
|
Rank: Super-Elite Groups: Registered
Joined: 16/08/2010 Posts: 2,771 Points: 8,344 Location: Brighton
|
Great start Alan. looks a nice kit. look forward to seeing this one come together. Ian Current builds.Hachettes build the bismark,HMS Victory, HMS Hood. Finished Builds Corel HMS Victory cross section.
|
|
Rank: Super-Elite Groups: Registered
Joined: 31/05/2010 Posts: 5,679 Points: 17,011 Location: Wiltshire
|
Good start Alan. It is a fantastic kit and so impressed with the way its all laid out and the quality of the parts. I was particularly impressed with just how smooth the mast dowels are - the best i have ever seen in any kit i have ever purchased. Have you decided what brand of paint you will use for this one? Hope the rest of the build goes well. Happy Modelling
BUILDING: Hachette Spitfire Mk 1A, Constructo Mayflower SUBSCRIPTION COMPLETE (Awaiting building): USS Constitution, Sovereign of the Seas, 1:200 Bismarck (Hachette) COMPLETED: Porsche 911, E-Type Jaguar, Lam Countach
|
|
Rank: Master Groups: Registered
Joined: 19/05/2015 Posts: 1,419 Points: 4,272 Location: Darmstadt, Germany
|
Oh this one should be good. Having the usual troubles with your photos, but the ones I see look great already. Only 139 stages to go.
|
|
|
Nice start to the frame work Alan. Look forward to more ... Chris On the bench 1/350 Revell Tirpitz Platinum Edition (Pontos PE and Wooden deck) plus extra Eduard PE set and extra MK1 door sets.
|
|
|
Thanks everyone for the great comments, appreciate you looking in.... @Tony, as yet I haven't decided on what paints to use and I'm open to suggestions..... Regards Alan
|
|
|
Stage 2 Removed the two second deck sections from their frets and cleaned up all the edges of ash. Test fitted the decks in place to ensure all fitted well, no problems found. Starting from the edge that runs down the centre of the deck, I started laying veneer strips (0.5 x 4 x 300mm) one after the other until the deck sections were covered. Left everything to dry overnight. Turned the deck sections over and using a fresh blade in my craft knife I trimmed all the surplus strips from around the decks. I kept the offcuts, they are of a length that will likely come in useful later in the build. Then used a fine sanding block and sanded all the edges smooth. Following the grain of the wood I then sanded the decks smooth, again using a fine sanding block. Using a ruler and a fine pointed pencil I drew lines where the planks join to simulate the caulking. Followed the measurements outlined in the instructions and drew in the joints for the ends of the planks followed by the treenails. The decks were then given 2 coats of matt varnish and allowed to dry completely. Finally in this issue I fitted and glued the two decks in place, clamping at key points to ensure they didn’t lift anywhere and left to dry. This completes stage 2. Regards Alan Gandale attached the following image(s):
|
|
|
Looking great Alan. Lovely planking and those trenails are so uniform. Great work. Chris On the bench 1/350 Revell Tirpitz Platinum Edition (Pontos PE and Wooden deck) plus extra Eduard PE set and extra MK1 door sets.
|
|
|
magpie1832 wrote:Looking great Alan. Lovely planking and those trenails are so uniform. Great work. Chris Thanks Chris, so far she is a lovely kit to put together.... Regards Alan
|
|
Rank: Amateur Level 1 Groups: Registered
Joined: 22/12/2016 Posts: 29 Points: 70 Location: US
|
It's a very clean build. Interesting choice to draw in the caulking lines after the planking had been laid. I've usually seen people draw on the edges of the planks before they're glued on. But, it looks really good, I must say.
|
|
|
RichieG wrote:It's a very clean build. Interesting choice to draw in the caulking lines after the planking had been laid. I've usually seen people draw on the edges of the planks before they're glued on. But, it looks really good, I must say. Thanks Richie, appreciate you looking in and your comments.. .. The planking and simulated caulking has been done as laid out in the instructions. It's the first time I've tried it this way and must agree with you, it appears to work really nicely.... Regards Alan
|
|
Guest
|