|
|
 Rank: Amateur level 2  Groups: Registered
Joined: 28/07/2015 Posts: 42 Points: 122 Location: USA
|
I'm building my own display case, can anyone tell me the dimensions of the base the track sits on? LxWx/H
thanks!
|
|
|
|
|
 Hi The base is as follows L= 1078mm W= 210mm H= 40mm. The raised centre section is 16mm inside all around the above. Andy  Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .
|
|
|
Rank: Amateur level 2 Groups: Registered
Joined: 28/07/2015 Posts: 42 Points: 122 Location: USA
|
what do you mean by the raise section is 16mm?
does the base sit in an area that is 16mm deep?
|
|
|
 Rank: Super-Elite      Groups: Registered
Joined: 27/01/2014 Posts: 5,060 Points: 14,980
|
Wnt2Fly wrote:what do you mean by the raise section is 16mm?
does the base sit in an area that is 16mm deep? I believe that Andy means the raised section is set 16mm in from the edge of the base, the cover sits on this 16mm wide part. You see the completed case in the official build http://forum.model-space...aspx?g=posts&t=23231
|
|
|
Rank: Amateur level 2 Groups: Registered
Joined: 28/07/2015 Posts: 42 Points: 122 Location: USA
|
Ok so if I wanted to make a clear case for it, the inside raised portion is 1046mm x 178mm (that is just 32 subtracted from 1078 and 210 respectively)
If I had a lid made that had an inner dimension of 1041x173mm i think I should be safe.
What would the height need to be?
|
|
|
|
|
28CM Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .
|
|
|
Rank: Amateur level 2 Groups: Registered
Joined: 28/07/2015 Posts: 42 Points: 122 Location: USA
|
arpurchase wrote: 28CM 28?!? Come on can't be that much! Now i've got to go measure what i've got built so far. Can't be more than 20mm
|
|
|
Rank: Administration   Groups: Registered, Forum Support Team, Administrators, Global Forum Support Team, Moderator, Official Builds Joined: 09/11/2012 Posts: 8,264 Points: 23,880 Location: East midlands
|
Wnt2Fly wrote:arpurchase wrote: 28CM 28?!? Come on can't be that much! Now i've got to go measure what i've got built so far. Can't be more than 20mm If you go to tools and accessories the dimensions are given and it clearly states 280mm which = 28cms and gives an amount of clearance between the train and the case. If you wish to reduce that clearance then you are of course at liberty to do so. At the end of the day if you are building your own display case, then that choice is up to you. Would be interested to see how it pans out. Regards delboy271155 (Derek) COME BACK GUY FAWKES "YOUR COUNTRY NEEDS YOU"
|
|
|
|
Guest (2)
|
US
