|
|
 Rank: Beginner Level 2 Groups: Registered
Joined: 25/06/2017 Posts: 12 Points: 36 Location: London
|
Hi All, I'm Ron, a total newbie at ship modelling. I've been lurking around for a week or two after ordering the Vic, but now the first pack has arrived, I've decided a diary is a very good idea. here's an album I've started in Google, Ron's HMS Victory Build AlbumSo far, I've put together the first half of the hull frame. I'll wait till I receive packs 11-20 before I add the keel extension as I don't want a flappy bit of wood hanging off the model for 2-3 weeks. I'm also going to leave the guns till I have more (mainly because I think I'll lose them if I build them one by one). This leaves the launch to keep me occupied till my next delivery. Updates to follow... Ronjamino attached the following image(s): HMS Victory : Diary | Gallery
|
|
|
|
|
Always great to see another build of the Victory get underway and so pleased to see you've decided to produce a diary of your progress.... All looks good so far, nice work.... Good luck with the build, remember if you need guidance or advice then we're here to help.....  Regards Alan
|
|
|
 Rank: Pro   Groups: Registered
Joined: 22/02/2017 Posts: 155 Points: 474 Location: Ireland
|
Nice set of pictures Ron. It's coming along nicely. Graham I was drowning my sorrows. But my sorrows they'd learned to swim.
|
|
|
Rank: Beginner Level 2 Groups: Registered
Joined: 25/06/2017 Posts: 12 Points: 36 Location: London
|
Thanks both, I'm both excited and terrified. She's a big girl! haha  HMS Victory : Diary | Gallery
|
|
|
|
|
 Very nice start Ron looking forward to your build Rgd Martyn Building ?
Completed. Soliei Royal . Sovereign of the Seas . Virginia . Scotland . San Felipe . Corel vasa , Santisima Trinadad X section , Vasa
Next Build ?
When sailors have good wine, They think themselves in heaven for the time. John Baltharpe
|
|
|
 Rank: Elite   Groups: Unapproved
Joined: 24/05/2010 Posts: 1,761 Points: 5,351 Location: London & Greece
|
Looks good Ron.
One thing to keep checking for at this stage is that the keel remains straight. If you see any deviation, sort it out immediately. Leaving it to later or missing it, will lead to a deal of trouble rectifying it in the future.
BTW good idea using Google for you pics.
|
|
|
 Rank: Vice-Master   Groups: Registered
Joined: 26/09/2010 Posts: 851 Points: 2,565 Location: Walsall
|
Looks great Ron Very nice to see you here and look forward to your progress. Keep up the good work. Regards FOz
|
|
|
 Rank: Master    Groups: Registered
Joined: 20/09/2011 Posts: 1,312 Points: 4,126 Location: Austria
|
Nice start, Ron!Greetings,
Walter
Present builds:
Revell B-24D Liberator 1:48
On the shelf:
Italeri "Fiat Mefistofele", Italeri "Moto Guzzi California", Fokker "Red Baron", Revell Bismarck, Revell Tirpitz, Arab Dow, Stage Coach, .....
Completed builds:
McLaren MP4/4, D-51 Steam Locomotive, HMS Victory, GWH F-15D Eagle, St. Stephen`s Cathedral (cardboard), Solar-powered paddle Steamer (little project with my son), HMS Victory X-section, "Geli" Phantom II (cardboard)
|
|
|
 Rank: Super-Elite   Groups: Registered
Joined: 16/08/2010 Posts: 2,771 Points: 8,344 Location: Brighton
|
Nice start Ron. Ian. Current builds.Hachettes build the bismark,HMS Victory, HMS Hood.
Finished Builds Corel HMS Victory cross section.
|
|
|
Rank: Superelite  Groups: Registered
Joined: 10/05/2010 Posts: 2,608 Points: 7,519 Location: Lincolnshire
|
Good start Ron I agree with your methodology. I was the same with my Trinny build. Keep up the good work 
|
|
|
Rank: Super-Elite  Groups: Registered
Joined: 19/06/2013 Posts: 4,588 Points: 13,553 Location: West Yorkshire
|
Great start to your build Ron, looks good.
Al
|
|
|
Rank: Beginner Level 2 Groups: Registered
Joined: 25/06/2017 Posts: 12 Points: 36 Location: London
|
Wow, thanks for the kind words of support everyone. I have to admit, I'm slightly starstruck as I've read a few of your build diaries, amazing stuff there guys, I'm humbled! So in the last couple of days, I've assembled the launch frame and after a bit of psyching myself up, had a go at the first few planks using the ultra frugal kettle method to bend them (i tried soaking them in warm water but didn't get on with it) I'm not massively impressed with my results thus far to be fair, there seems to be a significant amount of daylight creeping in between the planks and they aren't sitting flush against each frame, in fact, some frames aren't touching the planks at all! I don't think I sanded down the frame enough. I intend to remedy this with wood glue, maybe a bit of filler and plenty of sanding, if things really don't shape up, this could affect my decision as to whether I paint this thing or leave it 'au naturelle'. first plank attempt - vic launchRonjamino attached the following image(s): HMS Victory : Diary | Gallery
|
|
|
Rank: Elite Groups: Unapproved
Joined: 24/05/2010 Posts: 1,761 Points: 5,351 Location: London & Greece
|
Still looks good though.
Remember also, these planks are very thin unlike the lady herself, so only the lightest of sanding will be possible.
|
|
|
Rank: Master  Groups: Registered
Joined: 29/03/2011 Posts: 1,053 Points: 3,165 Location: Glenvista JHB
|
Hi Ron, Welcome to the forum. You have made a fine start. Look forward to following your build. Kind regards, Garth "Measure twice, cut once!!!"
Finished!!! HMS Victory,
Current build: Black Pearl.
On hold: Bismarck, Golden Hind, Flying Scotsman, Victory Cross Section, SOTS, Tiger 1.
Wish list: USS Constitution.
|
|
|
|
|
Looking great jase “Whenever you find yourself on the side of the majority, it is time to pause and reflect.”
-Mark Twain
|
|
|
Rank: Pro  Groups: Registered
Joined: 04/10/2016 Posts: 135 Points: 412 Location: Newcastle U.K.
|
Welcome to the forum Ron. You are making a good start and it is good to see that you are using a jig to keep the keel straight. This is my first build too and I'm loving it. I wish I'd got into model building years ago. Alan. Today is the tomorrow you wished for yesterday!
|
|
|
Rank: Beginner Level 2 Groups: Registered
Joined: 25/06/2017 Posts: 12 Points: 36 Location: London
|
NikonD60 wrote:Welcome to the forum Ron.
You are making a good start and it is good to see that you are using a jig to keep the keel straight. This is my first build too and I'm loving it. I wish I'd got into model building years ago.
Alan. Thanks again all, Alan, I felt getting that jig sorted quickly was important after visiting this forum, and I'm really glad to see another first timer on here too! Do you mind me asking how far in are you? HMS Victory : Diary | Gallery
|
|
|
Rank: Pro Groups: Registered
Joined: 04/10/2016 Posts: 135 Points: 412 Location: Newcastle U.K.
|
Ronjamino wrote:NikonD60 wrote:Welcome to the forum Ron.
You are making a good start and it is good to see that you are using a jig to keep the keel straight. This is my first build too and I'm loving it. I wish I'd got into model building years ago.
Alan. Thanks again all, Alan, I felt getting that jig sorted quickly was important after visiting this forum, and I'm really glad to see another first timer on here too! Do you mind me asking how far in are you? Not at all Ron, I'm at Stage 45 (pack 5) planking the deck. I really thought I'd reached a milestone when I finished planking the hull and fitted the keel. Been on with it since October and I pleased and astounded by the way it's looking. Alan NikonD60 attached the following image(s): Today is the tomorrow you wished for yesterday!
|
|
|
Rank: Beginner Level 2 Groups: Registered
Joined: 25/06/2017 Posts: 12 Points: 36 Location: London
|
It looks amazing Alan, and what a handsome cat! HMS Victory : Diary | Gallery
|
|
|
Rank: Vice-Master Groups: Registered
Joined: 26/09/2010 Posts: 851 Points: 2,565 Location: Walsall
|
HI ROn
Looking real good so far mate and look forward to seeing more.
As for bening the planks and the gaps you say you have.
I found soaking them in boiling water for 10 to 15 mins first helped bend them, then pin them lightly to the hull but dont glue them untill they have dried.
That way the shrinking will nt show if you have put them on before they have dried.
Hope this helps
regards
FOz
|
|
|
|
Guest (6)
|
US
