|
Rank: Pro Groups: Joined: 24/08/2009 Posts: 48,827 Points: -13,348
|
The infamous dreidecker of the "Red Baron" Manfred von Richthofen!
https://www.youtube.com/watch?v=nZgGOelZoiw
https://www.youtube.com/watch?v=1CfRfKTxgjg
Only available as a full kit!
This new kit includes a revolutionary step-by-step multimedia DVD guide with video tutorials and hundreds of colour photos! (note - the propeller is not motorized but is operable by hand).
The Fokker Dr.1 Dreidecker (triplane) was a World War 1 fighter aircraft built by Fokker-Flugzeugwerke. The Dr.1 saw widespread service in the spring of 1918 which became renowned as the aircraft in which Manfred von Richthofen gained his last 19 victories. Richthofen is considered the ace-of-aces of the war, being officially credited with 80 air combat victories. By 1918, he was regarded as a national hero in Germany, and widely respected even by his enemies. The fact that he had his aircraft painted red, led to Richthofen being called "The Red Baron" both inside and outside Germany. Richthofen was shot down and killed near Amiens on 21 April 1918. There has been considerable discussion and debate regarding aspects of his career, especially surrounding his death. Though RAF Captain Roy Brown was officially credited with shooting down Richthofen, it is now generally agreed that the bullet that hit Richthofen was fired from the ground. Captain Brown donated the seat of the DR.1 (in which Richthofen made his final flight) to the Royal Canadian Military Institute in 1920. The seat also holds a side panel signed by the pilots of Brown's squadron. The engine was donated to the Imperial War Museum in London, where it is still on display, the museum also holds the Spandau machine guns. The control column (joystick) of Richthofen's DR.1 can be seen at the Australian War Memorial, in Canberra.
Richthofen remains perhaps the most widely known fighter pilot of all time and his red Fokker Dr.1 one of the most instantly recognised aircraft of all time.
The DR.1 also inspired a number of movies such as "The Blue Max" and "Flyboys".. https://www.youtube.com/watch?v=0ejaNRXaQzg
https://www.youtube.com/watch?v=Efc6Y6LCuuc
Iron Maiden's front man owns a Dr.1 http://www.telegraph.co....e-runs-low-on-fuel.html
The Artesania 1/16 Red Baron Fokker DR.1 kit is available here: https://www.model-space....red-baron-full-kit.html
|
|
Rank: Administration Groups: Registered, Forum Support Team, Administrators, Global Forum Support Team, Moderator, Official Builds Joined: 09/11/2012 Posts: 8,178 Points: 23,622 Location: East midlands
|
Sweet Nice scale too. Regards delboy271155 (Derek) COME BACK GUY FAWKES "YOUR COUNTRY NEEDS YOU"
|
|
Rank: Super-Elite Groups: Registered
Joined: 17/12/2013 Posts: 3,982 Points: 11,974 Location: NY, USA
|
Thats a great looking kit.
Carl
|
|
Rank: Super-Elite Groups: Registered
Joined: 27/01/2014 Posts: 5,060 Points: 14,980
|
Oh wow, that is one cool looking kit
|
|
Rank: Pro Groups: Joined: 24/08/2009 Posts: 48,827 Points: -13,348
|
Looks to be a nicely engineered kit, could be a lot of fun for those that decide to take it on, with an impressive model to show at the end of the build?!
Kev
|
|
|
Nice looking kit that builds into a nice model Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .
|
|
Rank: Super-Elite Groups: Registered
Joined: 19/06/2013 Posts: 4,588 Points: 13,553 Location: West Yorkshire
|
That looks like a quality kit, look forward to seeing a few being built on the forum.
Al
|
|
Rank: Pro Groups: Registered, Official Builds Joined: 10/02/2012 Posts: 475 Points: 1,237
|
Given the past collaborations between Artesania Latina and Model Shipways (HMS Vanguard comes to mind), I strongly suspect this is nothing more than a rebox of the existent Model Airways kit. I believe DarbyVet has built it? Tired, Old, and Cranky!
|
|
Rank: Super-Elite Groups: Registered
Joined: 17/12/2013 Posts: 3,982 Points: 11,974 Location: NY, USA
|
Yes i did build the model airways kit.I actually just had to throw it away.I knocked it off a shelf and it didnt survive the fall.This is similar to the model airways kit, but it has more photoetched parts, the engine details is better and the wing ribs look different to me.It looks like all of the parts that gave me the most trouble have been modified a bit.I may go for this since my Dr1 has gone now.
Carl
|
|
Rank: Pro Groups: Registered
Joined: 08/05/2015 Posts: 239 Points: 693 Location: Wisconsin
|
|
|
Rank: Pro Groups: Joined: 24/08/2009 Posts: 48,827 Points: -13,348
|
experten wrote:Given the past collaborations between Artesania Latina and Model Shipways (HMS Vanguard comes to mind), I strongly suspect this is nothing more than a rebox of the existent Model Airways kit.
I believe DarbyVet has built it? Actually, it's a brand new kit of this iconic aircraft which has many differences and differing content over and above the Expo version which darbyvet has already mentioned
|
|
|
Looks fantastic “Whenever you find yourself on the side of the majority, it is time to pause and reflect.” -Mark Twain
|
|
Rank: Pro Groups: Joined: 24/08/2009 Posts: 48,827 Points: -13,348
|
A nice touch in having a hand operable rotating rotary engine/propeller.. https://youtu.be/gpA-52-wAzE
|
|
Rank: Pro Groups: Joined: 24/08/2009 Posts: 48,827 Points: -13,348
|
Mini Art do a 1/16 Manfred von Richthofen plastic kitTomick attached the following image(s):
|
|
Rank: Pro Groups: Joined: 24/08/2009 Posts: 48,827 Points: -13,348
|
The Artesania DR.1 kit is on sale 1st Aug https://www.artesanialat...ion-del-baron-rojo.html
Note that the brass template to create the "wood grain effect" is an optional extra.
The ModelSpace offer/availablity will be just as soon as stock arrives.
|
|
Rank: Super-Elite Groups: Registered
Joined: 30/01/2013 Posts: 4,604 Points: 13,607 Location: Monmouthshire UK
|
Anyone know if there is an option to skin this model? Steve
|
|
|
Looks a great kit. Love the PE wood effect template. Chris On the bench 1/350 Revell Tirpitz Platinum Edition (Pontos PE and Wooden deck) plus extra Eduard PE set and extra MK1 door sets.
|
|
Rank: Pro Groups: Joined: 24/08/2009 Posts: 48,827 Points: -13,348
|
stevie_o wrote:Anyone know if there is an option to skin this model? Steve No option in the kit as such but no reason why it could not be skinned.
An idea might be to use one of the RC model aircraft skinning products such as Solartex, which is a textured iron-on heat-shrink skin. Normal solarfilm is the smooth glossy version which was supplied with the Hachette DR.1 which in my opinion looked too modern. You need to be careful not to overshrink the material as it can induce warp to the work being covered and it's recommended to practice on a cheap open frame model such as one of the Guillows balsa kits, but with care and using the correct tool (covering irion), a great result can be achieved. Satin Solartex is a superlight, extra fine woven fabric film which is factory pre-coloured and is available in many colours including red. A special heat activated adhesive on the back of the fabric gives excellent adhesion to wooden surfaces and to the coloured side of the Solartex, also the adhesive is colourless so the airframe is not contaminated with the fabric colour.
https://balsamart.co.uk/...tbjul3v7cplgl2b9prevc96
To apply to the airframe simply use a covering iron at a temperature of 100~120ºc, for shrinking and stretching increase the temperature to 130~150ºc. You can use a travel iron as the fabric applicator tool, but using a proper covering iron is far superior benefit as it gets into all the nooks and crannies a lot easier. Its better balanced for modelling use with a "wand" handle behind the hotplate rather than above it. Also, most have a two part angled sole - the front quarter or so being angled up, this helps in getting just the tip into various areas. http://hurricanemodels.c...TweUEAQYASABEgKLnvD_BwE
You could also consideror the traditional method of covering model aircraft using tissue & dope, but again, be mindful of how you go about this so as to avoid inducing warp.
|
|
Rank: Pro Groups: Joined: 24/08/2009 Posts: 48,827 Points: -13,348
|
Hasegawa did a nice limited edition 1/8 Le Rhone 110 replica engine kit that would compliment a DR.1 display.. http://www.hasegawausa.c...uct-pages/hsgs1994.html
Can occasionally find this kit on eBay
|
|
Rank: Pro Groups: Registered, Official Builds Joined: 10/02/2012 Posts: 475 Points: 1,237
|
Hi All, Last night, for giggles, I sent Model Expo a email asking about the lineage if this kit. Tomick, sir, you are correct. It is 100% a new kit, and the gentleman from Model Expo who responded to my email was more than a bit grumpy about it. He did make a point of mentioning that the instructions for the Model Expo kit were written in "excellent English" though. Oh, and that it wasn't made in China. That's hardly enough to sway me towards getting the model Expo kit! Tired, Old, and Cranky!
|
|
Guest (7)
|