|
|
|
|
Very well done Rob, your efforts have certainly paid off and have ended up with a beautiful display piece....  . So what's next on your horizon.... Regards Alan
|
|
|
 Rank: Pro   Groups: Registered
Joined: 20/12/2011 Posts: 232 Points: 674 Location: shetland
|
Thanks Alan, The next project was going to be the Sovereign of the seas, but there are a few choices, cannot decide just yet. i was hoping to get the cross section first and put it in a cabinet with the Victory but it is sold out. Going on holiday in July will decide after that I think. Any ideas how to keep the dust off it until i make the cabinet, I am using compressed air at he mo,spraying once a week  . cheers mate rob
|
|
|
Rank: Pro  Groups: Registered
Joined: 04/10/2016 Posts: 135 Points: 412 Location: Newcastle U.K.
|
Beautiful job Rob, you must be proud. Hope mine turns out as good. Alan. Today is the tomorrow you wished for yesterday!
|
|
|
Rank: Pro Groups: Registered
Joined: 20/12/2011 Posts: 232 Points: 674 Location: shetland
|
Thanks Alan, I have to admit I did not know I had the patience. live and learn eh!. now to get it covered !!!more patience!!! Thanks again
|
|
|
Rank: Pro Groups: Registered
Joined: 20/12/2011 Posts: 232 Points: 674 Location: shetland
|
Gandale wrote:Very well done Rob, your efforts have certainly paid off and have ended up with a beautiful display piece.... . So what's next on your horizon.... Regards Alan I am currently building the R2-D2 model.fascinating stuff.
|
|
|
 Rank: Super-Elite      Groups: Registered
Joined: 16/08/2010 Posts: 2,771 Points: 8,344 Location: Brighton
|
Hi Rob. Fantastic looking build. very well done. Ian Current builds.Hachettes build the bismark,HMS Victory, HMS Hood.
Finished Builds Corel HMS Victory cross section.
|
|
|
 Rank: Master    Groups: Registered
Joined: 29/03/2011 Posts: 1,053 Points: 3,165 Location: Glenvista JHB
|
Hi Rob, Congratulations on a superb build. Kind regards, Garth "Measure twice, cut once!!!"
Finished!!! HMS Victory,
Current build: Black Pearl.
On hold: Bismarck, Golden Hind, Flying Scotsman, Victory Cross Section, SOTS, Tiger 1.
Wish list: USS Constitution.
|
|
|
Rank: Pro Groups: Registered
Joined: 20/12/2011 Posts: 232 Points: 674 Location: shetland
|
Thanks for all the kind words really appreciated . I am just about to put the crew in place on the main mast deck etc, i would really like to put more of a crew on board but cannot find any more figurines, there are some on Cornwall model boats http://www.cornwallmodel...catalog/amati_crew.html
but they are 1 mm short, do you think that would be noticeable if i put them on the mizzen deck and fore deck. is there any more word on the cross section build??? thanks in advance rob
|
|
|
 Rank: Vice-Master  Groups: Registered
Joined: 26/09/2010 Posts: 851 Points: 2,565 Location: Walsall
|
A great build Rob, a real credit to you. Have sent you a PM mate about the figures. Regards Foz 
|
|
|
Rank: Pro Groups: Registered
Joined: 20/12/2011 Posts: 232 Points: 674 Location: shetland
|
Hi folks, just about finished the crew and have put some on the decks as shown, as you can see from the pics there are a lot left over, I am just about to start the cross section, I could use them for that i suppose, the silver guy has not been painted yet as you can see just intrigued how he looked on the shroud . cheers for now. Thanks foz for the little blokes cheers for now i see all the pic not showing still, strange File Attachment(s): sandnesspeats attached the following image(s):
|
|
|
|
|
Figures look great, nicely done.... .. Cheers Alan
|
|
|
Rank: Pro Groups: Registered
Joined: 20/12/2011 Posts: 232 Points: 674 Location: shetland
|
thanks Alan very fiddly.
cheers
|
|
|
|
|
sandnesspeats wrote:thanks Alan very fiddly.
cheers
Yes they are fiddly to do but your efforts have produced great results.... Regards Alan
|
|
|
Rank: Master  Groups: Registered
Joined: 20/09/2011 Posts: 1,312 Points: 4,126 Location: Austria
|
That figures look great!Greetings,
Walter
Present builds:
Revell B-24D Liberator 1:48
On the shelf:
Italeri "Fiat Mefistofele", Italeri "Moto Guzzi California", Fokker "Red Baron", Revell Bismarck, Revell Tirpitz, Arab Dow, Stage Coach, .....
Completed builds:
McLaren MP4/4, D-51 Steam Locomotive, HMS Victory, GWH F-15D Eagle, St. Stephen`s Cathedral (cardboard), Solar-powered paddle Steamer (little project with my son), HMS Victory X-section, "Geli" Phantom II (cardboard)
|
|
|
|
|
Your figures look great, I know how fiddly they are to do. I need a big magnifying glass.  Mark
|
|
|
Rank: Master Groups: Registered
Joined: 29/03/2011 Posts: 1,053 Points: 3,165 Location: Glenvista JHB
|
Hi Rob, Your figures are certainly looking the part. Kind regards, Garth "Measure twice, cut once!!!"
Finished!!! HMS Victory,
Current build: Black Pearl.
On hold: Bismarck, Golden Hind, Flying Scotsman, Victory Cross Section, SOTS, Tiger 1.
Wish list: USS Constitution.
|
|
|
Rank: Pro Groups: Registered
Joined: 20/12/2011 Posts: 232 Points: 674 Location: shetland
|
|
|
|
 Rank: Amateur Level 2 Groups: Registered
Joined: 04/10/2017 Posts: 41 Points: 141 Location: NEW JERSEY
|
I realize this reply is to an older post, but I've just recently joined here. Rob showed what terrific work he did on the Victory, but wasn't happy with the paper flags. If I may, let me share what I did to make my Mamoli Constitution as she was, with 15 stars & stripes, in 1812. 1- spray adhesive to regular printing paper, affixing a piece of linen smoothly. 2- cut around edges. 3- easily found images for 15 star flags, long pennant, etc., (from Google), then sized them correctly. 4- printed them out (with just an average Epson), then printed the mirror image. 5- carefully cut out, peeled from paper, then glued together with diluted white glue. 6- sprayed with a fabric stiffener and shaped some folds into them. (Only negative- they printed just slightly faded, but really, that's great, I did all I could to get a weathered look everywhere else) Hope this may help someone! Bruce
|
|
|
Rank: Pro Groups: Registered
Joined: 20/12/2011 Posts: 232 Points: 674 Location: shetland
|
ENJAY49 wrote: I realize this reply is to an older post, but I've just recently joined here.
Rob showed what terrific work he did on the Victory, but wasn't happy with the paper flags. If I may, let me share what I did to make my Mamoli Constitution as she was, with 15 stars & stripes, in 1812.
1- spray adhesive to regular printing paper, affixing a piece of linen smoothly.
2- cut around edges.
3- easily found images for 15 star flags, long pennant, etc., (from Google), then sized them correctly.
4- printed them out (with just an average Epson), then printed the mirror image.
5- carefully cut out, peeled from paper, then glued together with diluted white glue.
6- sprayed with a fabric stiffener and shaped some folds into them.
(Only negative- they printed just slightly faded, but really, that's great, I did all I could to get a weathered look everywhere else)
Hope this may help someone! Hi enjay and welcome thanks for the reply better late than never eh! . The flags turned out be of a silky material and were fine as it turned out.i am pretty sure your tip will help someone. thanks again
|
|
|
|
Guest
|
US
