|
|
 Rank: Beginner Level 1 Groups: Registered
Joined: 15/12/2018 Posts: 6 Points: 18 Location: Uk
|
So I had an r2 that the red light would come on but didn't do anything else. So I ordered a new mcu which arrived today and after a full afternoon replacing it I have powered r2 up and his dome spins too fast. Is there a fix for this? Thank you
|
|
|
|
|
Double check the wires too the head motor are fully seated and making good contact. Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .
|
|
|
Rank: Beginner Level 1 Groups: Registered
Joined: 22/09/2018 Posts: 5 Points: 15
|
I have the same problem, after power up the dome slams one whether the other, then doesnt center. I have a new mcu on order as checked all the connections several times. everything else works, except he doesnt move his head when asked to shake it in the app or when on patrol. it moves fast when usig manual mode In the app.
|
|
|
 Rank: Pro Groups: Joined: 24/08/2009 Posts: 48,827 Points: -13,348
|
ckember999 wrote:I have the same problem, after power up the dome slams one whether the other, then doesnt center. I have a new mcu on order as checked all the connections several times. everything else works, except he doesnt move his head when asked to shake it in the app or when on patrol. it moves fast when usig manual mode In the app. You’ve notes the same across 3 members topics, can you please create your problem topic rather than repeating the same into other members topics. Hopefully the MCU swop will resolve your problem.
Thanks
|
|
|
Rank: Beginner Level 1 Groups: Registered
Joined: 15/12/2018 Posts: 6 Points: 18 Location: Uk
|
I've just fitted a new MCU so hope it's not that again! Heard some people say it might be a faulty dome motor?
|
|
|
Rank: Pro Groups: Joined: 24/08/2009 Posts: 48,827 Points: -13,348
|
Jonnyc1988 wrote:I've just fitted a new MCU so hope it's not that again! Heard some people say it might be a faulty dome motor? That’s the next thing to swop if the MCU swop does not resolve it and double check that the wiring between the two is secure/has good connection etc.
|
|
|
|
Guest
|
US
