Welcome Guest Search | Active Topics | Log In | Register

15 Pages «<89101112>»
Fozys Build Options
Foz
#181 Posted : 24 July 2011 15:38:21

Rank: Vice-Master

Active Service Medal: 500 post active service MedalBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 26/09/2010
Posts: 851
Points: 2,565
Location: Walsall
Well i finally have an afternoon off and have got home, unfortunatly i need to be back for 6am in the morning, so after doing the hospital visits to see parents i can spend a few quality hours with the old VIC.

But FIRST, i would like to say that this forum is like a family. Never have i done any thing before were i have found so much help and support than this forum, and not just by the way of advice and encouragement.

To that end i would now like to publicly thank all those that offered help when it was discovered a twist in the hull of my build.

Mainley.

A big thank you to David, AKA Lonestar Spirit, who offerd his build so far free of charge to me. That offer really made me feel like being a part of a family, so DAVID, thank you.

When i discovered i had lost the cabin parts, and asked for dimesions to try and build them myself, again people on this forum came to help. For this part Daffy09 came to my aid as he had spare parts. He, now i presume Daffy is a he, sent those parts to me. I asked him for his details and the cost of sending them to me and was told it was OK. So again, a big thank you to daffy09.

And to all those that offred spare planking when i might have had to start again. THANK YOU, all of you.

Well this is the longest post i have ever written on her but i needed to say thanks to those great people on here so that, all those that read this know how helpfull people on this forum are.

best regards

Foz
Foz
#182 Posted : 24 July 2011 15:40:22

Rank: Vice-Master

Active Service Medal: 500 post active service MedalBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 26/09/2010
Posts: 851
Points: 2,565
Location: Walsall
So then. Down to the build. Not got much time today so have just finished of the bullwalk linings and going to start the gun port linings and the cabin partions.



Happy building folks

Foz ThumpUp
karl1113
#183 Posted : 24 July 2011 16:06:06

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 04/04/2010
Posts: 3,955
Points: 11,809
Location: uk
comming on a storm,very well done.
Current builds: SotS, USS Consitution, San Felipe, D51 loco, HMS Surprise, RB7, Arab Dhow, Jotika HMS Victory
Completed builds: HMS Pickel, Thermopylae, Mississipi river boat, Mary Rose, Cutty Sark, San Francisco II, HMS Victory x5, Titanic Lifeboat, Panart HMS Victory Launch, Hachette Titanic, Virginia Schooner, Endeavour Longboat.

http://www.model-space.com/gb/
jonny7england
#184 Posted : 24 July 2011 16:39:57

Rank: Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 22/03/2010
Posts: 2,065
Points: 6,295
Location: Gorleston-on-sea
Glad to see you back on your build Foz...looking great as usual...ThumpUp
Current Builds: Deagostini HMS Victory: Deagostini HMS Sovereign of the seas. Completed Builds: Del Prado: HMAS Bounty: Hachette: RMS Titanic: Del Prado: Cutty Sark...
tf64
#185 Posted : 24 July 2011 20:19:00

Rank: Elite
Publisher Medal: Featured Build of the Month May 2020Active Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 13/02/2011
Posts: 2,233
Points: 6,819
Location: East Sussex
Hi Foz,
I certainly agree with your comments on this forum I did follow your build and your problems and I did feel sorry for you after all that hard work,but with the help of this forum and your skill with in your hands you did not let it get you down well done Foz.

Regards tf64.
Work in progress: Tombstone (Scratch) - San Francisco 2. -The Mayflower ( scratch by plan).

OcCre- Santa-Maria (Kit).


























MWG
#186 Posted : 24 July 2011 20:59:36

Rank: Super-Elite

Active Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 24/04/2010
Posts: 5,787
Points: 17,662
Location: Stafford, United Kingdom
Well done Foz, great to see you at it!!!!BigGrin LOL
MWG BUILD DIARIES: HMS VICTORY, SOVEREIGN OF THE SEAS, SAN FRANCISCO II, HMS HOOD, HMS ENDEAVOUR LONGBOAT, HMS VICTORY X-SECTION, 007 DB5, NISSAN GTR, CUTTY SARK, RB7, AKAGI, BARK HMS ENDEAVOUR, HUMMER H1, MITSUBISHI ZERO.

Foz
#187 Posted : 30 July 2011 15:24:33

Rank: Vice-Master

Active Service Medal: 500 post active service MedalBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 26/09/2010
Posts: 851
Points: 2,565
Location: Walsall
Thanks for the comments Lads. Well back home at last for a day and half at least so time to continue the build.

So far have painted the bullwarks.


And thanks to daffy, i now have the cabin partions up.


So the rest of this afternoon os going to be spent getting the poop deck on, so will keep you posted.

Happy building

Foz BigGrin
Foz
#188 Posted : 30 July 2011 15:28:07

Rank: Vice-Master

Active Service Medal: 500 post active service MedalBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 26/09/2010
Posts: 851
Points: 2,565
Location: Walsall
Quick question.

It says in the magazine to trim the hight of the ships wheel when doing the poop deck.

Question is, do you take equal amounts from both top and bottom, or just from the top?

Thanks on advance for your advice.

Foz
karl1113
#189 Posted : 30 July 2011 16:28:41

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 04/04/2010
Posts: 3,955
Points: 11,809
Location: uk
take your pick,not much to take off,but be careful it's very fragile.
Current builds: SotS, USS Consitution, San Felipe, D51 loco, HMS Surprise, RB7, Arab Dhow, Jotika HMS Victory
Completed builds: HMS Pickel, Thermopylae, Mississipi river boat, Mary Rose, Cutty Sark, San Francisco II, HMS Victory x5, Titanic Lifeboat, Panart HMS Victory Launch, Hachette Titanic, Virginia Schooner, Endeavour Longboat.

http://www.model-space.com/gb/
Foz
#190 Posted : 30 July 2011 16:46:04

Rank: Vice-Master

Active Service Medal: 500 post active service MedalBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 26/09/2010
Posts: 851
Points: 2,565
Location: Walsall
I know how fragile it is Karl. Allready snaped it once, cant see the break as its to the rear, But i think ill try a little from both sides so the wheel is more central.

Thanks

FOz
jonny7england
#191 Posted : 30 July 2011 17:01:44

Rank: Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 22/03/2010
Posts: 2,065
Points: 6,295
Location: Gorleston-on-sea
Something else I didn't know Foz (about the ship's wheel that is) Still, she's looking good mate...I'm still preparing the hull ready for copper painting...then the task of fitting the cannon, ect.Blink Crying ..Keep the pics coming Foz...ThumpUp
Current Builds: Deagostini HMS Victory: Deagostini HMS Sovereign of the seas. Completed Builds: Del Prado: HMAS Bounty: Hachette: RMS Titanic: Del Prado: Cutty Sark...
MWG
#192 Posted : 30 July 2011 17:04:45

Rank: Super-Elite

Active Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 24/04/2010
Posts: 5,787
Points: 17,662
Location: Stafford, United Kingdom
Nice build FozBigGrin
MWG BUILD DIARIES: HMS VICTORY, SOVEREIGN OF THE SEAS, SAN FRANCISCO II, HMS HOOD, HMS ENDEAVOUR LONGBOAT, HMS VICTORY X-SECTION, 007 DB5, NISSAN GTR, CUTTY SARK, RB7, AKAGI, BARK HMS ENDEAVOUR, HUMMER H1, MITSUBISHI ZERO.

Foz
#193 Posted : 31 July 2011 13:28:00

Rank: Vice-Master

Active Service Medal: 500 post active service MedalBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 26/09/2010
Posts: 851
Points: 2,565
Location: Walsall
Thanks fopr the comments lads, allways appreciated. So another day gone by and issue 58 now complete.



Foz
#194 Posted : 31 July 2011 13:32:50

Rank: Vice-Master

Active Service Medal: 500 post active service MedalBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 26/09/2010
Posts: 851
Points: 2,565
Location: Walsall
Well the last pic shows the planking not looking very good but it does look better when not close up.

Have stained the deck now.




You will notice the ships wheel, not exactly central. This is due again to the warp i have and it has thrown the mast slightly off also. Something ill have to live with.



And the picture here not very clear but i added some cord around the wheel.



So thats it for now. Only got 1 more issue to go then i am back on track with my build.

happy building folks. BigGrin
MWG
#195 Posted : 31 July 2011 13:34:55

Rank: Super-Elite

Active Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 24/04/2010
Posts: 5,787
Points: 17,662
Location: Stafford, United Kingdom
Well done fozy, looks good to meCool
MWG BUILD DIARIES: HMS VICTORY, SOVEREIGN OF THE SEAS, SAN FRANCISCO II, HMS HOOD, HMS ENDEAVOUR LONGBOAT, HMS VICTORY X-SECTION, 007 DB5, NISSAN GTR, CUTTY SARK, RB7, AKAGI, BARK HMS ENDEAVOUR, HUMMER H1, MITSUBISHI ZERO.

jonny7england
#196 Posted : 31 July 2011 14:01:28

Rank: Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 22/03/2010
Posts: 2,065
Points: 6,295
Location: Gorleston-on-sea
Hi Foz, great build mate...that mast problem you have, would it help to off-set the top hole from the centre line slightly with a round file...also the hole in the deck below...I had to do this with my Cutty Sark. I used a home made wooden collar to hide the modification...it worked well for me mate...Hope this idea helps...
Blink
Current Builds: Deagostini HMS Victory: Deagostini HMS Sovereign of the seas. Completed Builds: Del Prado: HMAS Bounty: Hachette: RMS Titanic: Del Prado: Cutty Sark...
Foz
#197 Posted : 31 July 2011 14:18:08

Rank: Vice-Master

Active Service Medal: 500 post active service MedalBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 26/09/2010
Posts: 851
Points: 2,565
Location: Walsall
Thanbks Jonny.

Its not out to much and from the side you cant tell its out so, for this build im going to leave it and, well, for the other builds i have and future ones its a lesson learned.

jeff averre
#198 Posted : 01 August 2011 14:35:18

Rank: Pro

Build-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 29/03/2010
Posts: 202
Points: 569
Location: sunderland
Hate to be the one to bring bad news Foz,Crying but it looks like your upper 'wale' and 'moulding' has been fitted too high!
I believe Jonny (england) had a similar problem and managed to fix it, have a look on his build diary, it may save problems later on, don't worry too much about ripping bits off to rectify problems, weve all been there but it's very satisfying when it's been sorted.Cool

Best of luck whatever you decide to do.Mellow

Jeff
jeff averre
#199 Posted : 01 August 2011 14:41:43

Rank: Pro

Build-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 29/03/2010
Posts: 202
Points: 569
Location: sunderland
Ps, Other than that you are doing a cracking job with your build, keep up the good work.BigGrin
Jeff
Foz
#200 Posted : 01 August 2011 19:24:15

Rank: Vice-Master

Active Service Medal: 500 post active service MedalBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 26/09/2010
Posts: 851
Points: 2,565
Location: Walsall
Hi Jeff

I know they are a bit high but due to unforseen problems with my build from day 1, there is not a lot i can do about it, mainley a twist in the hull.

And at the end of the build, not many people will get to see it so ill just put it down to experience, (LACK OFF) and live with it.

I have learned so much from other builders on here by doing this build that the other ships i have on the go will benifit from what i have learned, and i plan on doing another victory later on with a lot more knowlege under my belt.

Anyway, thanks for pointing that out and happy building.

regards

Foz
Users browsing this topic
Guest (3)
15 Pages «<89101112>»
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.450 seconds.
DeAgostini