|
|
|
|
Than you everyone for looking in and your comments.  I’m only halfway through pack 11, loads do do in this one.  Mark
|
|
|
 Rank: Superelite      Groups: Registered
Joined: 10/05/2010 Posts: 2,608 Points: 7,519 Location: Lincolnshire
|
Looks a really good kit Mark, and coming together well
Cheers Gray
|
|
|
|
|
Thank you Gray for you comments. Still completing pack 11. As I said a lot of work to do in this part of the build and quite honestly you need three pairs of hands on some parts to fit. I did run into a couple of issues along the way, one of which was my own doing.  I had difficulty fixing the rear exhaust pipe to the engine block, it just didn’t sit right which meant I couldn’t attach the bracket on the frame in the right place. After several hours I found the problem. In the first picture you will see that the ball end is not seated correctly into the top section with the pin not fitting into the slot. Once this was rectified, hey presto, it fitted correctly.  The other issue was that the instruction showing the rear footrest fitting behind the exhaust, when in fact they should fit in front. You don’t want the rear passenger burning his/her foot on the exhaust pipe. The next lot of pictures show how and where they were altered. An easy fix. I have just fitted the front forks and now finishing off the cables This is quite a beast of a kit, I will show more pictures later. Now where is that wide angle camera.  Markwarren attached the following image(s):
|
|
|
|
|
All looking good and nice work Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .
|
|
|
Rank: Super-Elite   Groups: Registered
Joined: 19/06/2013 Posts: 4,588 Points: 13,553 Location: West Yorkshire
|
Superb work Mark good spot with the footrests. Al
|
|
|
Rank: Super-Elite   Groups: Registered
Joined: 31/05/2010 Posts: 5,679 Points: 17,011 Location: Wiltshire
|
They put one heck of a lot of detail into this kit when they designed it Mark. The more i seeof this one the more its growing on me and you seem to be getting more build per instalment on this one. Tony Happy Modelling
BUILDING: Hachette Spitfire Mk 1A, Constructo Mayflower
SUBSCRIPTION COMPLETE (Awaiting building): USS Constitution, Sovereign of the Seas, 1:200 Bismarck (Hachette)
COMPLETED: Porsche 911, E-Type Jaguar, Lam Countach
|
|
|
Rank: Super-Elite   Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,507 Points: 13,681 Location: ipswich
|
You really are taking great care with this one.
That's what lifts a model into the next level. Keep it coming - a fascinating build.
Roy.
|
|
|
|
|
Many thanks guys for the comments. I have finally finished pack 11, and as luck would have it, the postman bought the final pack 12 this morning. So, I set to fixing the clutch and throttle cables to the handlebars. As you can see in these pictures it is some size.  Mark Markwarren attached the following image(s):
|
|
|
|
|
Pack 12 In the final pack we get to fit spark plugs all the cabling and pipework as well as fit the seat and front tank. You also got to change some of the screws fitted in earlier stages with the proper bolts, which is a nice touch. Finally, I then gave the chrome my oil treatment to take off the highly, too shiny, chrome plating to give it a more authentic look. The final pictures are of the Captain America complete. It has been a pleasure building this, although frustrating at time, but this is a well detailed kit and looks absolutely stunning to look at.  I will be posting the final gallery pictures shortly with the helmet attached as well. Thanks all for looking and following this build. Mark Markwarren attached the following image(s):
|
|
|
|
|
Looks huge Mark, my question would be where are you going to be able to display this beast.... .. Beautiful build and credit to your skills.... Regards Alan
|
|
|
|
|
Gandale wrote:Looks huge Mark, my question would be where are you going to be able to display this beast.... .. Beautiful build and credit to your skills.... Regards Alan Thank you Alan. Not sure where it will go just yet, think I need a bigger house. Mark
|
|
|
Rank: Super-Elite  Groups: Registered
Joined: 20/10/2016 Posts: 4,504 Points: 13,548 Location: Wiltshire
|
Very nice Mark. Looks absolutely superb! Regards, Phil W. Completed projects: 1/43 scale Bedford HA van / 1/43 scale MG TD sports car
Current projects: 1/48 scale U-boat [U230]
Future projects: 1/148 scale railway diorama / 1/50 scale R/C Volvo F89 logging truck / 1/148 scale Thunderbirds Fireflash
|
|
|
Rank: Super-Elite Groups: Registered
Joined: 17/12/2013 Posts: 3,982 Points: 11,974 Location: NY, USA
|
looks fantastic.Put on some Springsteen and blast "Born in the USA" as loud as you can!!
Carl
|
|
|
Rank: Superelite Groups: Registered
Joined: 10/05/2010 Posts: 2,608 Points: 7,519 Location: Lincolnshire
|
darbyvet wrote:looks fantastic.Put on some Springsteen and blast "Born in the USA" as loud as you can!!
Carl
Or better still 'Born to be Wild' by Steppenwolf  Great result Mark Cheers Gray
|
|
|
 Rank: Beginner Level 3  Groups: Registered
Joined: 21/10/2016 Posts: 29 Points: 87 Location: uk
|
what a stunning model, it just keeps getting better casp
|
|
|
Rank: Administration  Groups: Registered, Forum Support Team, Administrators, Global Forum Support Team, Moderator, Official Builds Joined: 09/11/2012 Posts: 8,285 Points: 23,943 Location: East midlands
|
Wish I had the space for this one it looks stunning. Regards delboy271155 (Derek) COME BACK GUY FAWKES "YOUR COUNTRY NEEDS YOU"
|
|
|
|
Guest
|
US
