|
|
 Rank: Amateur Level 1 Groups: Registered
Joined: 14/04/2011 Posts: 39 Points: 110 Location: Milton Keynes
|
Hi Everyone I've been building my MP4-23 out of sequence, basically to detail parts of the model with carbon fibre when I have the time (a winter project and finding the patience to cut the shapes, although I have seen some of the excellent efforts on this forum already). But HOLD YOUR HORSES! Assuming DeAgo will offer them to the UK, look what came out with Issue 52 in Japan, a set of templated carbon fibre decals for parts of the model. Some are obvious where they go, others not so, and some like inside of rear wing end plate are missing, unless there are more to come. Cheers Lloydy15 Lloydy15 attached the following image(s):
|
|
|
 Rank: Pro   Groups: Registered
Joined: 07/04/2011 Posts: 251 Points: 741 Location: Leeds
|
Good spot! It would be nice to see a closer up image of the detailing! Tomick/Admin, is this something you can confirm? Have you got a list of parts per issues? Thanks Building the McLaren MP4-23
|
|
|
 Rank: Super-Elite     Groups: Registered
Joined: 24/04/2010 Posts: 5,787 Points: 17,662 Location: Stafford, United Kingdom
|
Very intresting,keep the info coming, good stuff  MWG BUILD DIARIES: HMS VICTORY, SOVEREIGN OF THE SEAS, SAN FRANCISCO II, HMS HOOD, HMS ENDEAVOUR LONGBOAT, HMS VICTORY X-SECTION, 007 DB5, NISSAN GTR, CUTTY SARK, RB7, AKAGI, BARK HMS ENDEAVOUR, HUMMER H1, MITSUBISHI ZERO.
|
|
|
 Rank: Semi-Pro Level 1  Groups: Registered
Joined: 05/05/2011 Posts: 66 Points: 138 Location: Manchester
|
How easy are they going to be to add to the model at that late stage in the build.
|
|
|
Rank: Pro  Groups: Registered
Joined: 08/03/2011 Posts: 245 Points: 726 Location: Norwich
|
Interesting  Well spin my nipple-nuts & send me to AlaskaCurrent Builds:McLaren MP4-23Finished007's Aston Martin DB5FinishedMillennium FalconR2-D2BTTF Delorean (Maybe)
|
|
|
Rank: Pro Groups: Joined: 24/08/2009 Posts: 48,827 Points: -13,348
|
Senna94 wrote:Good spot!
It would be nice to see a closer up image of the detailing!
Tomick/Admin, is this something you can confirm?
Have you got a list of parts per issues?
Thanks I've not seen this yet, will let you know if I do.
|
|
|
Rank: Pro Groups: Registered
Joined: 27/05/2011 Posts: 256 Points: 774 Location: barrow in furness
|
the way my order for decals is going, ill probably have these before the ones ive ordered turn up! be interesting to find out if we are getting them and a good close up picture to see the quality. i imagine these decals will just be for suspension parts and maybe small pieces of body work. the inside of the rear wing has the "pattern" on the plastic so i guess the decals wouldn't be made for that area? If at first you don't succeed........skydiving is not for you!
|
|
|
Rank: Pro Groups: Registered
Joined: 08/03/2011 Posts: 245 Points: 726 Location: Norwich
|
One thing is for sure, I bet they will be a nightmare to fit on a half assembled model   Well spin my nipple-nuts & send me to AlaskaCurrent Builds:McLaren MP4-23Finished007's Aston Martin DB5FinishedMillennium FalconR2-D2BTTF Delorean (Maybe)
|
|
|
Rank: Pro Groups: Registered
Joined: 07/04/2011 Posts: 251 Points: 741 Location: Leeds
|
scottww86 wrote:the way my order for decals is going, ill probably have these before the ones ive ordered turn up! be interesting to find out if we are getting them and a good close up picture to see the quality.
i imagine these decals will just be for suspension parts and maybe small pieces of body work. the inside of the rear wing has the "pattern" on the plastic so i guess the decals wouldn't be made for that area? Hi Mate, which carbon decals have you ordered, I havn't ordered yet but Im going to start soon with the decals. Building the McLaren MP4-23
|
|
|
Rank: Semi-Pro Level 1 Groups: Registered
Joined: 20/06/2011 Posts: 53 Points: 132 Location: basildon
|
Thats great news seeing that i was getting jealous of everyone that has carbon wrap theres but tbh carbon wrap will probably look better and these are not going to be a joy applying fancy leaving that far into a build would have been better as you build but never mind
all the best Dave
|
|
|
 Rank: Vice-Master  Groups: Registered
Joined: 31/08/2011 Posts: 629 Points: 1,963 Location: Plymouth
|
I think i may leave my model the way it is....I can see this getting very messy, especially around the suspension arms  IF we are going to get these decals, why did we not get them earlier in the build????? 
|
|
|
Rank: Pro  Groups: Registered
Joined: 05/04/2011 Posts: 266 Points: 784 Location: Essexshire
|
Good find there !!
They look like front / rear bones / brake ducts and front wing diffusser.
Should be ok to fit
|
|
|
Rank: Pro  Groups: Registered
Joined: 05/07/2011 Posts: 126 Points: 354 Location: Withernsea East Yorkshire
|
Ah ah right thats got me all excited now! if these are coming to us then i think i'm going to wait till around next november time then the issues finish before i start mine as you never know what might pop up, got 21 parts all unopened now  MeffMan 
|
|
|
Rank: Vice-Master Groups: Registered
Joined: 11/05/2011 Posts: 766 Points: 2,128 Location: Dagenham
|
Personally I'm hoping we dont get these as I've bin building ya go so they will be a pain in the axxx to put on CURRENT BUILDS
Mclaren MP4-23
Ford 1/12 Shelby Mustang GT500 2010
HMS Pandora
|
|
|
Rank: Pro Groups: Joined: 24/08/2009 Posts: 48,827 Points: -13,348
|
Hi all, I'm also hoping that we DON'T get them!! Perfectly happy with the suspension arms, etc, being black, as you wouldn't see more than that from even a short distance on the real car anyway, so why 'tart' it up?? Would be a waste of £7.99 as far as I'm concerned as I just wouldn't use the parts from that issue and why leave it so late in the build anyway??  If we do get them I think I will sell mine on to the people who need a second set after they've tried fitting the first, just to recover some of the money!!! Would keep the mag though  Regards ... Kev.
|
|
|
Rank: Pro Groups: Registered
Joined: 07/04/2011 Posts: 251 Points: 741 Location: Leeds
|
I have to be honest, I agree with the rest of you on this, can't believe it's so far in to the build! I'll be using decal for mine but not waiting that long! Put them on the model half built would be so hard, I'm doing it as I build! Building the McLaren MP4-23
|
|
|
Rank: Vice-Master Groups: Registered
Joined: 31/08/2011 Posts: 629 Points: 1,963 Location: Plymouth
|
Exactly...surely they don't think we just save up all the parts and start building next Christmas!!
|
|
|
Rank: Pro Groups: Registered
Joined: 27/05/2011 Posts: 256 Points: 774 Location: barrow in furness
|
Senna94 wrote:scottww86 wrote:the way my order for decals is going, ill probably have these before the ones ive ordered turn up! be interesting to find out if we are getting them and a good close up picture to see the quality.
i imagine these decals will just be for suspension parts and maybe small pieces of body work. the inside of the rear wing has the "pattern" on the plastic so i guess the decals wouldn't be made for that area? Hi Mate, which carbon decals have you ordered, I havn't ordered yet but Im going to start soon with the decals. ive ordered some studio 27 twill weave decals from grandprixmodels.com. still yet to arrive! emailed them and they say they are waiting for a delivery from japan! If at first you don't succeed........skydiving is not for you!
|
|
|
Rank: Pro  Groups: Registered
Joined: 09/08/2011 Posts: 386 Points: 1,129 Location: Hertfordshire
|
Now on Japans website to buy seperatly!!! So if your worried about the build coming along too far before we get them, for 1,100 yen you can order them and be ahead of the game! Interested? then click here
|
|
|
|
Guest (8)
|
US
