Issue 137
Here we continue the stand with its electrics and speaker fitted, the switch on this is touch sensitive but won't work via the plastic button fitted in stand though I got replacement switch for this it's just the same but they work via a touch with bare finger to this end I removed the plastic switch plate and cut out the bit of black plastic covering the hole were switch is fitted,so just the spring is visible in hole a touch on spring with bare finger and it turns on and off no problem why it don't work with plastic touching it God knows. Then just 3 ladders to attach to hanger doors, final bit of handrail around front superstructure and 8 more aa guns. Cheers mick.

Issue 138
Here we complete the stand it could have been sturdier in my opinion. Then assemble and fit the anchor buoys, a small bit of grating over front anchor hole, then fit the front anchor with its chain stoppers and the rear anchor chain stoppers. Put the boat on the stand switch on and all 4 main turrets will initialise ie turn one way rest for few seconds then return to center and stop mine does what it's supposed to do. That's me caught up now just 2 issues to go the remote control and rigging. Cheers mick.

Hi I did remove the plastic cover to the switch and cut out the black tab over it works fine that way ,I completed the Bismarck yesterday only thing that don't work is one the front anchors the chain is getting caught somewhere but cant see when its all together where and bow light ,the bulb works fine the fibre optic cable needs replacing, but going to let it go at that as all other functions work fine,and as have now done all the rigging it's very difficult to gain access to inside anyway, and as I rarely play with them when complete I'm ok with it as it is. Cheers mick

Hi mine is exactly the same I removed the battery's when not in use cheers mick.