Welcome Guest Search | Active Topics | Log In | Register

Optimus Prime Official Build Pack 6 Options
Markwarren
#1 Posted : 05 January 2024 20:05:53

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Administrators, Global Forum Support, Moderator, Forum Support Team, Official Builds

Joined: 04/01/2016
Posts: 6,481
Points: 19,757
Location: Northamptonshire, England
Issue 22

Assembling the Right Leg

Picture 1
shows the contents of the parts for this issue.

Snap the pins of the tibia outer detail into the holes of the knee frame as shown in pictures 2 and 3.
Fit the two hinge parts together by aligning the holes in both and fix the joint by inserting the plain end of the pin through the hole as shown in picture 4. Push the pin all the through using a small pair of pliers. Fit the remaining part in the same way so the complete assembly looks like picture 5.
Now take the tibia plate and fit the ball joint into the hole as shown in picture 6.
Fit the assembly onto the leg panel as shown in pictures 7 and 8 with an MP screw.

Picture 8 also shows the 5 locating lugs that will fit onto the side of the leg, attaching the pins into the holes to the side of the lower leg cap as shown in pictures 9 and 10.

Finally, fit the lower leg outer plate onto the side of the leg by snapping the two pins into the holes as shown in pictures 11 and 12.

Picture 13 shows the assembly complete for this issue.
Markwarren attached the following image(s):
22 (1).jpg
22 (2).jpg
22 (3).jpg
22 (4).jpg
22 (5).jpg
22 (6).jpg
22 (7).jpg
22 (8).jpg
22 (9).jpg
22 (10).jpg
22 (11).jpg
22 (12).jpg
22 (13).jpg
Markwarren
#2 Posted : 09 January 2024 21:29:14

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Administrators, Global Forum Support, Moderator, Forum Support Team, Official Builds

Joined: 04/01/2016
Posts: 6,481
Points: 19,757
Location: Northamptonshire, England
Issue 23

Assembling the Pelvis

Picture 1
shows the contents of the parts for this issue.

Fit the peg into pelvis detail as shown in pictures 2 and 3. Now turn the assembly over and secure the part with an IP screw, picture 4. Fit the next detail (23C) as shown in pictures 5 and 6.
Finally fit detail (23B) onto the right side of the pelvis as shown in picture 7.

Picture 8 shows the assembly complete for this issue.

Markwarren attached the following image(s):
23 (1).jpg
23 (2).jpg
23 (3).jpg
23 (4).jpg
23 (5).jpg
23 (6).jpg
23 (7).jpg
23 (8).jpg
Markwarren
#3 Posted : 09 January 2024 21:51:03

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Administrators, Global Forum Support, Moderator, Forum Support Team, Official Builds

Joined: 04/01/2016
Posts: 6,481
Points: 19,757
Location: Northamptonshire, England
Issue 24

Assembling the Pelvis

Picture 1
shows the contents of the parts for this issue.

Note: Before we start with the assembly of this issue, please note that parts 24F and 24G are different , as they are mirror images of each other. Picture 2

So let us get started. Push the left ball joint (24F) into the socket of the left rear plate as shown in pictures 3 and 4. Do the same using the right ball joint (24G) into the right rear plate as shown in picture 5.
Take the assembly from the previous issue and fit the front pelvis detail, pictures 6 and 7.

Now push the circular detail into the three holes as shown in picture 8, followed by the semicircular detail, pictures 9 and 10.

Picture 11 shows the assembly complete for this issue.
Markwarren attached the following image(s):
24 (1).jpg
24 (2).jpg
24 (3).jpg
24 (4).jpg
24 (5).jpg
24 (6).jpg
24 (7).jpg
24 (8).jpg
24 (9).jpg
24 (10).jpg
24 (11).jpg
Markwarren
#4 Posted : 14 January 2024 14:57:01

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Administrators, Global Forum Support, Moderator, Forum Support Team, Official Builds

Joined: 04/01/2016
Posts: 6,481
Points: 19,757
Location: Northamptonshire, England
Issue 25

Assembling the Pelvis

Picture 1
shows the contents of the parts for this issue.

Fit the post on the pelvis detail as shown in pictures 2 and 3. Now turn the assembly over and secure with an IP screw, picture 4.

That completes the assembly for this issue.
Markwarren attached the following image(s):
25 (1).jpg
25 (2).jpg
25 (3).jpg
25 (4).jpg
Markwarren
#5 Posted : 14 January 2024 15:03:06

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Administrators, Global Forum Support, Moderator, Forum Support Team, Official Builds

Joined: 04/01/2016
Posts: 6,481
Points: 19,757
Location: Northamptonshire, England
Issue 26

Assembling the Pelvis

Picture 1
shows the contents of the parts for this issue.

Take one of the pelvis inner cylinders and insert it inti the outer cylinder as shown in picture 2. Do the same with the other three-cylinder parts, picture 3.
Fit the pins in the semi-circular detail into the holes in the circular detail, picture 4.
Picture 5 shows the complete assembly.

That completes the assembly for this issue.

Markwarren attached the following image(s):
26 (1).jpg
26 (2).jpg
26 (3).jpg
26 (4).jpg
26 (5).jpg
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.271 seconds.
DeAgostini