Welcome Guest Search | Active Topics | Log In | Register

Robocop Official Build Pack 6 Options
Markwarren
#1 Posted : 05 March 2024 20:58:28

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Administrators, Global Forum Support, Moderator, Forum Support Team, Official Builds

Joined: 04/01/2016
Posts: 6,283
Points: 19,136
Location: Northamptonshire, England
Issue 19

The Left Knee Joint

Picture 1
shows the contents of this issue.

Take the left knee joint assembly from issue 18 and inert the sleeve (19A) as shown in pictures 2 and 3.

Fix the upper knee (19B) onto the assembly, You will need to move the sleeve down to fit the part, picture 4.

Turn the assembly over and secure in place with 2 x BP screws as shown in pictures 5 and 6.

Picture 7 shows the completed assembly for this issue.
Markwarren attached the following image(s):
19 (1).jpg
19 (2).jpg
19 (3).jpg
19 (4).jpg
19 (5).jpg
19 (6).jpg
19 (7).jpg
Markwarren
#2 Posted : 07 March 2024 19:44:37

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Administrators, Global Forum Support, Moderator, Forum Support Team, Official Builds

Joined: 04/01/2016
Posts: 6,283
Points: 19,136
Location: Northamptonshire, England
Issue 20

The Lower Left leg

Picture 1
shows the contents of this issue.

Take the knee joint assembly from the last issue and place the upper left knee (20B) in position and secure with 2 x EP screws, as shown in pictures 2 and 3. Push the sleeve back in place so that the lower slots are free, picture 4.

Take the assembly from issue 16, along with the part you’ve just assembled, picture 5. Place the joint inside the leg, pushing it into the lower grooves and secure with 2 x EM screws as shown in picture 6.

Take the support rod assembly from issue 17 and place it inside the part (20A), and secure it with 2 x AM screws, pictures 7 and 8.

Place the assembly on the leg as shown in picture 9 and secure with 2 x EM screws, picture 10.

Push the lower part of the rod into the recess of the foot and secure with an AM screw, picture 11. Turn the assembly over and secure the other side with an AM screw, picture 12.

Picture 13 shows the completed assembly for this issue.

Markwarren attached the following image(s):
20 (1).jpg
20 (2).jpg
20 (3).jpg
20 (4).jpg
20 (5).jpg
20 (6).jpg
20 (7).jpg
20 (8).jpg
20 (9).jpg
20 (10).jpg
20 (11).jpg
20 (12).jpg
20 (13).jpg
Markwarren
#3 Posted : 09 March 2024 18:19:53

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Administrators, Global Forum Support, Moderator, Forum Support Team, Official Builds

Joined: 04/01/2016
Posts: 6,283
Points: 19,136
Location: Northamptonshire, England
Issue 21

The Lower Left leg

Picture 1
shows the contents of this issue.

Fit the shin guard (21B) in place as shown in picture 2 and secure with 3 x BM screws, picture 3. Push fit the left knee (21A) in place as shown in picture 4.

Push fit the cap (21C) in place, making sure the part lines up as shown in picture 5.

Picture 6 shows the completed assembly for this issue.

Markwarren attached the following image(s):
21 (1).jpg
21 (2).jpg
21 (3).jpg
21 (4).jpg
21 (5).jpg
21 (6).jpg
Markwarren
#4 Posted : 11 March 2024 10:44:42

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Administrators, Global Forum Support, Moderator, Forum Support Team, Official Builds

Joined: 04/01/2016
Posts: 6,283
Points: 19,136
Location: Northamptonshire, England
Issue 22

The Lower Left leg

Picture 1
shows the contents of this issue.

Push fit the calf plate (22A) in position as shown in pictures 2 and 3. Continue with the inner knee plate (22B), picture 4.

Finally take the inner ankle plate (22C) and fit it as shown in picture 5 and 6.

That completes the assembly for this issue.
Markwarren attached the following image(s):
22 (1).jpg
22 (2).jpg
22 (3).jpg
22 (4).jpg
22 (5).jpg
22 (6).jpg
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.208 seconds.
DeAgostini