Welcome Guest Search | Active Topics | Log In | Register

Nissan Skyline Official build - Stages 45 - 50 Options
roymattblack
#1 Posted : 27 October 2024 10:27:28

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered

Joined: 04/06/2011
Posts: 4,422
Points: 13,423
Location: ipswich
STAGE 45:

These parts are for beginning to assemble the PCB units.

Locate the PCB, part 45G and the wire 01, part 45A.
Hold the PCB with the white connector facing you, but to the left.
Fit wire 01, part 45A to the pins on the right of the PCB, with the black wire at the rear and the red wire at the front.

Fit all the other wires, 02, 03, 04, 05 and 06, parts 45B, 45C, 45D, 45E and 45F in the same way, next to wire 01 and in numerical order.
All black wires go to the rear, red wires at the front.

Locate the blue connecting wire, part 45H and plug one end into the white connector on the end of the PCB.

Retrieve the other PCB saved from stage 44.
Locate the socket marked ‘O’ and plug the other end of the blue wire, part 45H into it.

Store these parts safely for now.


roymattblack attached the following image(s):
P1010001.JPG
P1010002.JPG
P1010003.JPG
P1010004.JPG
P1010005.JPG
P1010007.JPG
P1010008.JPG
roymattblack
#2 Posted : 28 October 2024 10:55:46

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered

Joined: 04/06/2011
Posts: 4,422
Points: 13,423
Location: ipswich
STAGE 46:

These parts are for adding more wiring to the PCB units.

Retrieve the PCB assemblies from the previous stage.
Locate wires 07, 08, 09 and 10, parts 46A, 46B, 46C and 46C.
Fit these to the long PCB, part 45G in the same way as the previous wires, adding them in numerical order next to the previous wires.
Make sure all the black wires are at the back and the red wires at the front.

Locate wire ‘S’ part 46G, and plug it into the terminal marked ‘S’ on the PCB.

Locate the wires marked ‘T’ and ‘Q’, parts 46H and 46F, and fit them to the respective terminals on the PCB.

Locate the wires marked ‘P’ and ‘U’, parts 46E and 46I, and fit them to the respective terminals on the PCB.

Locate the two wires, both labelled ‘C’ parts 46J and 46K and fit the plugs together, black to black and white to white.
Fit the plug on wire ‘C’ into the respective terminal on the PCB.

Store these parts safely for now.

roymattblack attached the following image(s):
P1010002.JPG
P1010003.JPG
P1010005.JPG
P1010006.JPG
P1010007.JPG
P1010008.JPG
P1010009.JPG
P1010010.JPG
P1010012.JPG
P1010013.JPG
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.121 seconds.
DeAgostini