|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,687 Points: 14,207 Location: ipswich
|
STAGE 81:
Right door.
Pic 1: Fit the inner trim, part 81B to the inside of the trim part 81A.
It will only fit one way.
Pic 2: Retrieve the right door assembly and fit the trim panel as shown.
Secure it using 5 x OP screws.
Pic 3: Press-fit the two door speakers, 81C and 81D into the door panel as shown.
Store the assembly safely for now.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,687 Points: 14,207 Location: ipswich
|
STAGE 82:
Bonnet/Hood.
Pic 1: Retrieve the main body shell assembly and fit the windshield cowling 82A as shown.
Pic 2: Secure the part from underneath using 3 x CP screws.
Pic 3: Retrieve the main bonnet/Hood assembly to fit the hinge parts as shown clearly in the next pictures.
Pic 4: Fit the left hinge bracket 82B to the inside of the bonnet/hood as shown.
The part will only fit one way.
Secure with 2 x AM screws.
Pic 5: Fit the right hinge bracket 82D to the other side of the bonnet/hood as shown.
The part will only fit one way.
Secure with 2 x AM screws.
Pic 6: Fit the other part of the left hinge bracket 82C to part 82B as shown and fix using 1 x AMC screw.
Pic 7: Fit the other part of the right hinge bracket 82E to part 82D as shown and fix using 1 x AMC screw.
Store the assembly safely for now.roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,687 Points: 14,207 Location: ipswich
|
STAGE 83:
Front left wing.
Pic 1: Locate the front wing and inner guard, parts 83A and 83B.
Pic 2: Fit the parts together as shown.
They will only fit one way.
Secure with 2 x SM screws.
Pic 3: Press the small GT badge, part 83C in place on the lower rear edge of the wing.
Make sure it is upright.
Store the assembly safely for now.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,687 Points: 14,207 Location: ipswich
|
STAGE 84:
Front body frame.
Pic 1: Retrieve the main body, 61A and locate the left front reinforcing frame, 84A.
Pic 2: Fit the parts together as shown and fix with 2 x AIM screws.
Pic 3: Shows the stage completed.
Keep the unused part.
Store the assembly safely for now.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,687 Points: 14,207 Location: ipswich
|
STAGE 85:
Front right wing.
Pic 1: Locate the front wing and inner guard, parts 85A and 85B.
Pic 2: Fit the parts together as shown.
They will only fit one way.
Secure with 2 x SM screws.
Pic 3: Press the small GT badge, part 85C in place on the lower rear edge of the wing.
Make sure it is upright.
Store the assembly safely for now.
roymattblack attached the following image(s):
|
|
|
|
Guest
|
US
