Welcome Guest Search | Active Topics | Log In | Register

Red Bull RB19 Official build. Stages 27 - 32 Options
roymattblack
#1 Posted : 09 November 2025 15:04:01

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered

Joined: 04/06/2011
Posts: 5,095
Points: 15,434
Location: ipswich
STAGE 27:

Front right wheel 1.

Pic 1: Locate the outer wheel parts 27A and 27C.
27C will fit inside 27A.

Pic 2: Fit the parts together as shown and fix with 2 x ‘A’ screws.

Pic 3: Store the assembly and unused part 27B safely for now.
roymattblack attached the following image(s):
P1010001.JPG
P1010002.JPG
P1010003.JPG
P1010004.JPG
roymattblack
#2 Posted : 10 November 2025 10:44:09

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered

Joined: 04/06/2011
Posts: 5,095
Points: 15,434
Location: ipswich
STAGE 28:

Front right wheel 2.

Pic 1: Retrieve the assembly 27A from the previous stage, and the wheel 28A.

Pic 2: Press-fit the cover 27A inside the front of the wheel 28A.
The protrusions on the rear of the cover will fit between the spokes on the wheel.

Pic 3: Shows how the parts fit together from the other side.

Pic 4: Press-fit the inner ring 27B saved from the previous stage in place.

Pic 5: Store the assembly and unused part 28B safely for now.
roymattblack attached the following image(s):
P1010001.JPG
P1010002.JPG
P1010003.JPG
P1010004.JPG
P1010005.JPG
P1010006.JPG
roymattblack
#3 Posted : 11 November 2025 10:13:46

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered

Joined: 04/06/2011
Posts: 5,095
Points: 15,434
Location: ipswich
STAGE 29:

Front right wheel 3.

Pic 1: Retrieve the wheel assembly from the previous stage, and the tyre 29A.

Pic 2: Fit the tyre over the wheel.
To do this you may find it better to remove the wheel cover for now to prevent damaging it as you press the tyre in place.
This is at the builder’s discretion.
A good deal of pressure is needed to get the tyre to sit properly on the wheel rim on both sides.
Take your time here and be careful.

Pic 3: When the tyre is in place, re-fit the wheel cover if you removed it.

Save the assembly and unused wheel nut 29B until later.
roymattblack attached the following image(s):
P1010001.JPG
P1010002.JPG
P1010003.JPG
P1010004.JPG
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.156 seconds.
DeAgostini