|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,260 Points: 15,932 Location: ipswich
|
STAGE 6:
Turbine engine 2.
Pic 1: Fit the 3 x 6-3 fans onto the shaft of the turbine assembly from the previous stage.
The three fans are all the same.
Make sure to tit them as shown.
Pic 2: Press-fit the shaft end 6-4 in place.
Pic 3: Locate the housing parts 6-1 and 6-2.
They will press-fit together.
Pic 4: Parts assembled.
Pic 5: Retrieve the turbine assembly and fit the housing in place as shown.
Fix using 2 x ‘D’ screws on one side.
Pic 6: Fix the other side with another 2 x ‘D’ screws.
Store the assembly safely.roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,260 Points: 15,932 Location: ipswich
|
STAGE 7:
Turbine engine 3.
Pic 1: Retrieve the turbine assembly and fit 2 x tubes 7-7 as shown.
Pic 2: Turn the assembly over and fit another 2 x 7-7.
Pic 3: Locate the oil pump parts 7-2 and 7-3.
The parts will push-fit together.
Pic 4: Parts assembled.
Pic 5: Fit the assembly to the pump support 7-1 as shown and fix with 1 x ‘D’ screw.
Pic 6: Fit the connector 7-5 into the end of the hose 7-4.
Pic 7: Fit the hose to the oil pump as shown.
Pic 8: Fit the connector 7-6 into the end of the hose 7-4.
Pic 9: Fit the hose to the oil pump as shown.
Store the parts safely.roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,260 Points: 15,932 Location: ipswich
|
STAGE 8:
Turbine engine 4.
Pic 1: Retrieve the turbine assembly and fit the 2 x oil filter tubes 8-2 as shown and fix from the other side with 2 x ‘E’ screws.
Pic 2: Fit 2 x filter base 8-5 as shown.
'E' screws fitted in step 1.
Pic 3: Fit 2 x filters 8-3 as shown.
Pic 4: Fit 2 x filter covers 8-6 as shown.
Pic 5: Fit 2 x filter caps 8-4 as shown.
Pic 6: Fit the assembly to the lower housing 8-1 as shown.
Pic 7: Fix from the other side with 2 x ‘D’ screws.
Store the assembly safely for now.
roymattblack attached the following image(s):
|
|
|
|
Guest
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
