|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,259 Points: 15,929 Location: ipswich
|
STAGE 39A:
Left radiator 3.
Pic 1: Retrieve the assembly from stage 36 and locate the pipes 39A and 39B.
Pic 2: Press-fit the pipes in place as shown.
Pic 3: Fit the radiator from stage 38 and fix from underneath with 2 x ‘A’ screws.
Pic 4: Fit the manifold 39C in place.
Pic 5: Fix from behind with 1 x ‘E’ screw and 1 x ‘A’ screw.
Pic 6: Locate the support 39E and the tubes numbered 1 and 2.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,259 Points: 15,929 Location: ipswich
|
STAGE 39B:
Pic 7: Attach one of the ‘1’ tubes and the ‘2’ tube as shown.
Pic 8: Fix the support to the main panel using 1 x ‘G’ screw from behind.
Pic 9: Connect the ends of the tubes to the manifold as shown.
Pic 10: Pass another ‘1’ tube (highlighted in grey) through the hole in the support nearest to the panel and connect each end where indicated.
Pic 11: Fit another ‘1’ tube (highlighted in grey) through the other hole in the support and connect each end as indicated.
Pic 12: Fit one of the short ‘5’ tubes to the pins on the manifold and tank as shown.
Pic 13: Store the assembly and unused parts safely.roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,259 Points: 15,929 Location: ipswich
|
STAGE 40:
Right panel.
Pic 1: Retrieve the unused parts from the previous stage.
Connect tubes ‘4’ and ‘5’ to the union 39D.
Pic 2: Connect tube ‘3’ to the union 39D.
Pic 3: Retrieve the left radiator assembly and press-fit the union 39D in place where shown.
The long tube ‘3’ will pass through the slot at the bottom of the support, indicated by the smaller circle.
Pic 4: Connect tube ‘3’ as indicated.
Pic 5: Connect tube ‘4’ where shown.
NOTE – The printed instructions show this connection to be in the wrong place.
Pic 6: Press-fit parts 40A and 40B together.
Store all parts safely for now.roymattblack attached the following image(s):
|
|
|
|
Guest
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
