|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,289 Points: 16,019 Location: ipswich
|
STAGE 1:
Hood and headlights.
Pic 1: Locate the light body 1F and the light unit 1D.
Pic 2: Fit the light unit into the back of the light body as shown.
It will only fit one way.
Pic 3: Assemble the other light with parts 1E and 1G in the same way.
Pic 4: Store your parts safely for now.roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,289 Points: 16,019 Location: ipswich
|
STAGE 2:
Fenders (wings) and headlights.
Pic 1: Locate the front section 2B and the 2 x sensors 2A.
The sensors will fit where indicated on the inside of 2B.
Pic 2: Sensor fitted and fixed with 1 x ‘A’ screw.
Pic 3: Other sensor fitted and fixed with 1 x ‘A’ screw.
Pic 4: Locate the front section 2B and the 2 x headlight lenses 2H.
The lenses will fit where indicated on the inside of 2B.
Each one will only fit on one side.
Pic 5: Shows the lenses fitted.
Pic 6: Locate the lower spoiler 2F.
It will fit under the nose section where indicated.
Pic 7: Fit the part in place and fix with 2 x ‘A’ screws.
Pic 8: Locate the two side panels 2G and the sidelight parts 2 x 2D and 2 x 2E.
The parts have the same numbers/letters but they are all actually handed left and right.
Pic 9: Fit the light parts together as shown.
They will only fit one way.
Pic 10: From the inside of the side panels, slide the light assemblies into the locating slots.
Pic 11: Store all parts safely for now.roymattblack attached the following image(s):
|
|
|
|
Guest
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
