|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,302 Points: 16,058 Location: ipswich
|
STAGE 57:
Rear right suspension arm.
Pic 1: Locate the arm 57A and the duct 57B.
The parts fit together as shown.
Pic 2: Fix the parts together from the other side with 2 x DP screws.
Pic 3: Fit the cooling scoop 57C as shown and fix with 1 x AM screw.
Pic 4: Locate the shock absorber mount 57D.
It will fit on the end of the arm 57A.
Pic 5: Fit the parts as shown and fix with 1 x CM screw.
Pic 6: Retrieve the rear axle assembly and fit the suspension arm in place as shown.
Fix with 1 x AM screw.
Pic 7: Retrieve the main car assembly and remove the two screws indicated.
DO NOT LOSE THE SCREWS.
Pic 8: Turn the car over and remove the two brackets indicated.
Pic 9: Fit the right bracket 43E to the end of the arm 57A in the position shown.
Fix it in place with 1 x AM screw from each side through the central holes in the bracket.
Store the assembly, removed screws and parts safely for now.roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,302 Points: 16,058 Location: ipswich
|
STAGE 58:
Rear left suspension arm.
Pic 1: Locate the arm 58A and the duct 58B.
The parts fit together as shown.
Pic 2: Fix the parts together from the other side with 2 x DP screws.
Pic 3: Fit the cooling scoop 58C as shown and fix with 1 x AM screw.
Pic 4: Locate the adjustable mount 58D.
It will fit on the end of the arm 58A and fix with 1 x CM screw.
Pic 5: Fit the arm mount 43D saved from the previous stage where you removed it from the car underside, to the end of the arm in the position shown.
Fix each side with 1 x AM screw.
Pic 6: Retrieve the assembly from the previous stage and fit the arm in the same way as the opposite side.
Fix it with 1 x AM screw.
Pic 7: Fit the upper housing from stage 55 and fix it with 4 x AM screws.
Pic 8: Press fit the ‘U’ clamp 58D in place as shown.
It will only fit one way round.
Pic 9: Repeat with the other ‘U’ clamp on the opposite side.
Store the assembly safely for now.roymattblack attached the following image(s):
|
|
|
|
Guest
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
