|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,327 Points: 16,133 Location: ipswich
|
STAGE 45:
Rear left suspension 2.
Pic 1: Locate the hub parts 59C and 59D.
They will fit together as indicated.
Pic 2: Parts assembled.
Pic 3: Fit the assembly to the back plate 45A.
Pic 4: From the other side, fix with 2 x ‘B’ screws.
Pic 5: Fit the arm support 45B to the plate as shown and fix with 2 x ‘I’ screws from the other side.
Pic 6: Retrieve the assembly from the previous stage and fit the new assembly in place as shown.
It will only fit one way.
Pic 7: Fix from the other side with 2 x ‘A’ screws.
Store the assembly safely.roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,327 Points: 16,133 Location: ipswich
|
STAGE 46:
Rear left suspension 3.
Pic 1: Locate the main hub assembly and fit the arm 46A through the upper slot in the backplate as shown.
Fix on the inside using 1 x ‘B’ screw.
Pic 2: Turn the assembly over and fit the other arm 46B through the other slot in the position shown.
Fix from the inside with 1 x ‘B’ screw.
Store the assembly safely.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,327 Points: 16,133 Location: ipswich
|
STAGE 47:
Rear left suspension 4.
Pic 1: Retrieve the assembly from the previous stage and fit the arm 47A through the slot in the top of the hub in the direction shown.
Fix from the inside edge of the hub with 1 x ‘S’ screw.
Pic 2: Press-fit the brake deflector 47B into the backplate as shown.
It will only fit one way.
Pic 3: Fix the parts together with 1 x ‘R’ screw where indicated.
NOTE: The printed instructions show the screw being fitted in the wrong place.
Store the assembly safely.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,327 Points: 16,133 Location: ipswich
|
STAGE 48:
Rear left suspension 5.
Pic 1: Retrieve the assembly from the previous stage and locate the brake outer cover 48A.
This part will push-fit into the locating holes indicated.
It will only fit one way.
Pic 2: Parts assembled.
Store the assembly and unused part safely for now.
roymattblack attached the following image(s):
|
|
|
|
Guest
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
