|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,334 Points: 16,154 Location: ipswich
|
STAGE 63A:
Left roll cage.
Pic 1: Retrieve the assemblies from the previous stage and position them as shown.
Pic 2: Fix the seat belt brackets to the front of the tank and fix from behind with 4 x AP screws.
Pic 3: Fit the tank assembly in place on the floor, in front of the black fixing brackets.
To do this you will need to remove the top of the battery.
Pic 4: Shows the parts in place.
Pic 5: Fix the assemblies together using 4 x AP screws.
Pic 6: Locate the roll cage parts 63A and 63F.
Pic 7: Peel the backing from 63F and carefully wrap it around the top of the roll cage 63A.roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,334 Points: 16,154 Location: ipswich
|
STAGE 63B:
Pic 8: Locate the roll cage parts 63D and 63B.
Pic 9: Peel the backing from 63D and carefully wrap it around the top of the roll bar 63B.
Pic 10: Position the ‘Sabelt’ sticker 63E as shown.
Pic 11: Fit the roll bar between the tank and the front of the floor as shown.
Pic 12: Press-fit the front reinforcing panel to the front of the floor as shown.
Pic 13: Locate the suspension parts 63G, 63H and 63I.
They will fit together in the order shown.
Make sure the small hole in the shaft of 63H is in line with the slot in 63G.
Pic 14: Using the compression tool from stage 40, assemble the spring and fit the retaining pin 63J as shown.
If you do not still have the tool 40I, compress the assembly on a firm surface and fit the pin.
Pic 15: Store all parts safely for now.roymattblack attached the following image(s):
|
|
|
|
Guest
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
