Rank: Administration         Groups: Registered, Administrators, Global Forum Support, Moderator, Forum Support Team, Official Builds Joined: 04/01/2016 Posts: 7,090 Points: 21,577 Location: Northamptonshire, England
|
Issue 51
Central Exhaust Pipes
Picture 1 shows the parts for this issue.
Place the upper part of the right muffler (51D) on the right side of the trunk floor, picture 2, securing it in place using 2 x type F screws. Do the same on the other side with the left muffler (51C), picture 3.
Fit the two ends of the central exhaust pipes (51B) into the upper parts of the left and right mufflers as shown in picture 4, securing both in place with a G type screw. Insert the two front ends of the central exhaust into the left and right exhaust pipe, picture 5. Turn the assembly over and place 2 x type G screws into the central exhaust from the passenger compartment, picture 6.
Picture 7 shows the assembly complete for this issue.
Markwarren attached the following image(s): Regards
Markwarren
(Mark) Admin
|
Rank: Administration Groups: Registered, Administrators, Global Forum Support, Moderator, Forum Support Team, Official Builds Joined: 04/01/2016 Posts: 7,090 Points: 21,577 Location: Northamptonshire, England
|
Issue 52
Exhaust Pipes and Tail Pipes
Picture 1 shows the parts for this issue.
Begin the assembly by retrieving the left and right rear shock absorbers from issue 40. Turn the assembly upside down and attach both the shock absorbers and secure them in place using a type C screw from the other side.
Next, fit the two rear exhaust brackets (51A), securing them in place using a type E screw for each one, pictures 3 and 4. Attach the right exhaust end pipe (52D) securing it in place with a type G screw, picture 5. Push the end of the exhaust pipe into the exhaust bracket, picture 6. Do the same with the left rear exhaust pipe (52C), picture 7. Fit the two chrome tail pipes (52E & 52F) onto the exhaust pipes as shown in picture 8.
Push fit the two left and right mufflers in place, picture 9.
Retrieve the rear leaf spring assembly and fit the rear leaf spring shackles to the chassis, using 8 x type E screws as illustrated in pictures 10, 11 and 12.
Place the passenger compartment onto the chassis, picture 13. Turn the assembly over and secure in place using 4 x type C screws, picture 14.
Finally, retrieve the steering column support from issue 48 and using a type E screw, secure the steering column in place, picture 15.
That completes the assembly for this issue.
Markwarren attached the following image(s): Regards
Markwarren
(Mark) Admin
|
US
