|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,406 Points: 16,370 Location: ipswich
|
STAGE 1A:
Front spoiler.
Pic 1: Locate the spoiler parts 1A and 1B.
They will press-fit together.
Pic 2: Parts assembled.
Pic 3: Locate the spoiler parts 1C and 1D.
They will press-fit together.
Pic 4: Parts assembled.
Pic 5: Fit the end plate to the spoiler as shown and fix with 1 x NM screw.
Pic 6: Repeat on the other side with part 1G.
Pic 7: Fit the upper spoiler in place as shown.
The parts fit with pins/locating holes.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,406 Points: 16,370 Location: ipswich
|
STAGE 1B:
Pic 8: Fix at both ends with 1 x NP screw on each side.
Pic 9: Locate the lower flaps 1I and 1J.
They have a raised lip on one side which should be positioned upwards.
Pic 10: Press-fit the parts in place as shown.
Pic 11: Locate the upper fin 1H and press-fit it in place as shown.
Do the same on the other side with fin 1F.
Pic 12: Stick one of the pads 1L to the back of the flap adjuster 1K as shown.
Pic 13: Peel the backing paper off and stick the adjuster in place on the end of the spoiler.
The wider side of the adjuster should be towards the rear.
Repeat on the other side.
Pic 14: Store the assembly safely for now.
roymattblack attached the following image(s):
|
|
|
|
Guest
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
