|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,410 Points: 16,382 Location: ipswich
|
STAGE 21:
Left machine gun 2.
Pic 1: Press-fit the muzzle 21-3 onto the end of the barrel housing 21-4 as shown.
Optional detail:
You can carefully fill in the recesses on the housing with a fine black Sharpie to enhance the look.
This is at the builder’s discretion.
Pic 2: Retrieve the gun assembly from the previous stage and fit the barrel 21-2.
Pic 3: Fit the housing over the barrel as shown.
Pic 4: Press-fit the magazine 21-6 into the side of the gun body noting which way up it goes.
Pic 5: Lift the top cover.
Pic 6: Press-fit the bullet strip 21-5 in place as shown and then close the cover.
Pic 7: Store the assembly and unused part safely.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,410 Points: 16,382 Location: ipswich
|
STAGE 22:
Left disc launcher.
Pic 1: Fit the bracket 22-2 and cover 22-1 together as shown and fix with 1 x ‘G’ screw.
Pic 2: Push-fit the disc holder 22-3 into place as shown.
Pic 3: Locate the disc parts 22-4 and 22-5.
They will press-fit together.
Pic 4: Disc assembled.
Pic 5: Store the parts safely for now.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,410 Points: 16,382 Location: ipswich
|
STAGE 23:
Disc and gun compartment.
Pic 1: Locate the disc parts 23-2 and 23-3.
They will press-fit together.
Pic 2: Parts assembled.
Pic 3: Store everything safely for now.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,410 Points: 16,382 Location: ipswich
|
STAGE 24:
Left front wing.
Pic 1: Position the wing 24-1 upside down and fit the gun compartment 23-1 in place as shown.
Fix with 2 x A screws.
Pic 2: With the wing on its side as shown, fit the gun cover 24-2 in place and fix with 2 x A screws.
Pic 3: You can fit the machine gun here.
It is attached with magnets.
This is an optional fitting.
Pic 4: Alternatively you can fit the top cover 21-1 which is also held by magnets.
Both of these optional parts will be kept safely until the end of the build.
Store everything safely for now.
roymattblack attached the following image(s):
|
|
|
|
Guest
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
