|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,472 Points: 16,568 Location: ipswich
|
STAGE 6:
Engine crankcase and oil pan.
Pic 1: Locate the engine parts 6A and 6B.
They will fit together at the six marked locating points.
Pic 2: Parts fitted together, then fixed with 6 x E screws where indicated.
Pic 3: Store safely for now.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,472 Points: 16,568 Location: ipswich
|
STAGE 7A:
Engine components.
Pic 1: Locate the oil pump parts 7A and 7B.
7A will fit on top of 7B.
Pic 2: Fix together with 2 x F screws.
Pic 3: The assembly will fit on top of pump part 7C.
Pic 4: Fix together with 2 x F screws.
Pic 5: Retrieve the engine from the previous stage.
The assembled oil pump will fit where indicated in red.
Pic 6: Fix in place with 2 x E screws.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,472 Points: 16,568 Location: ipswich
|
STAGE 7B:
Pic 7: Locate the pump impeller 7D.
It will fit where indicated.
Pic 8: Fix with 2 x E screws.
Pic 9: Clutch housing part 7E will fit on top of 7F.
Pic 10: Fix the parts from behind with 3 x F screws.
Pic 11: The clutch housing will fit on the end of the engine assembly.
It will only fit one way.
Pic 12: Fix in place with 3 x E screws.
Pic 13: Also fix with 1 x F screw where indicated.
Pic 14: Fix with a further 2 x E screws where shown.
Pic 15: Store everything safely for now.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,472 Points: 16,568 Location: ipswich
|
STAGE 8A:
Coolant pump.
Pic 1: Locate the pump parts 8A and 8B.
They will fit together as indicated.
Pic 2: Fix the parts with 2 x F screws.
Pic 3: Fix the gear 8C with 1 x F screw.
Pic 4: The pump will fit to the engine where indicated.
Pic 5: Fix with 2 x E screws.
Pic 6: The coolant hose 8D will fit where shown. roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,472 Points: 16,568 Location: ipswich
|
STAGE 8B:
Pic 7: Fix with 2 x E screws.
Pic 8: Fix the other end with 2 x F screws.
Pic 9: Fit the upper coolant hose 8E where indicated.
Pic 10: Fix with 2 x E screws.
Pic 11: The bracket 8F fits over the hose just fitted.
Two pins on the bracket fit in two holes on the engine case.
Pic 12: Fix using 2 x E screws.
Pic 13: Store everything safely for now.
roymattblack attached the following image(s):
|
|
|
|
Guest
|
US
