|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,486 Points: 16,610 Location: ipswich
|
STAGE 6:
Front left brake.
Pic 1: Fit the disc parts 6A and 6B together.
Pic 2: Parts assembled.
Pic 3: Fit the disc centre 6E and fix with 2 x NP screws.
Pic 4: Fix the caliper parts 6C and 6D together with 2 x KM screws.
Pic 5: Fix the bracket 6F to the hub 6I with 2 x KM screws.
Pic 6: Press-fit the cooling duct parts 6G and 6H together.
Pic 7: Parts assembled.
Pic 8: Fit the connector 6J to the hub as shown.
Pic 9: Fit the air duct to the hub.
The parts will only fit one way.
Fix from underneath with 2 x CP screws.
Pic 10: Fit the disc to the hub.
Pic 11: Fit the caliper as shown and fix with 2 x KM screws.
Store the assembly safely.roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,486 Points: 16,610 Location: ipswich
|
STAGE 7:
Rear wheel.
Pic 1: Place the tyre 7A so that the bar code and symbol indicated is facing upwards.
Pic 2: Fit the outer rim 7B in place.
Pic 3: Fit the rear rim in place so that the four screw fixing points are in line on both parts of the rim
Fix with 4 x BM screws.
Store the wheel safely.
roymattblack attached the following image(s):
|
|
|
|
Guest
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
