|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,506 Points: 16,670 Location: ipswich
|
STAGE 81:
Driver’s seat.
Pic 1: Twist the end of the buckle 81C at right-angles as shown.
Pic 2: Fix an adhesive tab 81B to one end of the strap 81D.
Slide the buckle 81C onto the strap as indicated.
Pic 3: Peel the backing from the tab and fold the strap over the buckle.
Pic 4: Fix another tab 81B to the other end of the strap.
Pic 5: Feed the strap through the slot in the base of the seat 81A.
Pic 6: Turn the seat over, remove the backing from the tab and stick the strap down where indicated.
Pic 7: Store safely for now.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,506 Points: 16,670 Location: ipswich
|
STAGE 82:
Driver’s seat 2.
Pic 1: Fit the support bracket 82F to the back of the seat panel 82A as shown and fix from the other side with 2 x XP screws.
Pic 2: Fit the seat face 81A from the previous stage.
Pic 3: Check that the top tabs fit over the frame where indicated.
Pic 4: Fix the seat parts together with 3 x TP screws.
Make sure the lower tab is located properly where shown.
Pic 5: Fix the other side together with 3 x TP screws.
Make sure the lower tab is located properly where shown.
Pic 6: Fix the lower front with 3 x TP screws.
Pic 7: Fit the head protection brackets 82B and 82E as indicated and fix with 1 x TP screw in each.
Pic 8: Fit the head protection pads 82C and 82D where shown.
Pic 9: Store the seat for now.
roymattblack attached the following image(s):
|
|
|
|
Guest
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
