Welcome Guest Search | Active Topics | Log In | Register

1989 Batmobile Official build STAGES 33 - 38 Options
roymattblack
#1 Posted : 29 May 2026 12:36:20

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered

Joined: 04/06/2011
Posts: 5,510
Points: 16,682
Location: ipswich
STAGE 33:

Right front lights.

Pic 1: Retrieve the right front wing 32C and fit the light cover 33-2.
It will only fit one way.

The next steps are in a different order to the printed instructions to make assembly a lot easier.

Pic 2: Bend the LED end of one of the cables 33-5 at a dog-leg 90 degree shape as shown.

Pic 3: Press the LED into the holder 33-1 as shown, with the wires located in the lower slot.

Pic 4: Repeat with the other 2 x LED – 33-5.

Pic 5: Press-fit the LED holders 33-4 (shorter) and 2 x 33-3 (longer) in place where indicated.

Pic 6: Fit the assembly inside the front wing and fix with 1 x G screw.

Store safely for now.

roymattblack attached the following image(s):
PARTS 33.JPG
33 (1).JPG
33 (2).JPG
33 (3).JPG
33 (4).JPG
33 (5).JPG
33 (6).JPG
roymattblack
#2 Posted : 01 June 2026 15:14:25

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered

Joined: 04/06/2011
Posts: 5,510
Points: 16,682
Location: ipswich
STAGE 34:

Left front wheel 1.

Pic 1: Wheel part 34-2 will fit inside part 34-1.

Pic 2: Fit the parts together and fix with 4 x D screws.

Store safely for now.
roymattblack attached the following image(s):
PARTS 34.JPG
34 (1).JPG
34 (2).JPG
roymattblack
#3 Posted : 03 June 2026 10:01:22

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered

Joined: 04/06/2011
Posts: 5,510
Points: 16,682
Location: ipswich
STAGE 35:

Left front wheel 2.

Pic 1: The wheel from the previous stage will fit inside the tyre 35-1.
Make sure you insert the wheel the correct way up.
You will very likely need to soak the tyre in hot water for several minutes before fitting it to the wheel.
It is a VERY tight fit.
Dry the tyre thoroughly first and take care when using hot water.

Pic 2: Parts assembled.

Pic 3: Fit the outer tyre 35-2 and fix with 4 x D screws.

Pic 4: Store the wheel safely.
roymattblack attached the following image(s):
PARTS 35.JPG
35 (1).JPG
35 (2).JPG
35 (3).JPG
35 (4).JPG
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.185 seconds.
DeAgostini