|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,593 Points: 16,931 Location: ipswich
|
STAGE 93:
Left front wing.
Pic 1: Retrieve the upper body and fit 2 x CM screws where shown, then remove them.
It will make fitting them with the door in place easier.
Pic 2: Fit the left door and then fix with the 2 x CM screws.
Pic 3: On the inside, open the door and fix the retaining strap with 1 x ALM screw.
Pic 4: Fix the spacer 93B to the wing 93A as shown using 3 x AM screws.
Pic 5: Fit the wing in place on the body and fix from the inside with 1 x AM screw and 2 x BM screws.
Pic 6: Retrieve the front grille section and fix the light shroud 93C over the lamp 1D using 1 x AP screw.
Pic 7: Press-fit the light cover 93D in place as shown making sure the tab on one side faces up.
NOTE: The printed instructions incorrectly refer to these parts as the rear tail light.
Pic 8: Store everything safely for now.roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,593 Points: 16,931 Location: ipswich
|
STAGE 94:
Bonnet.
Pic 1: Retrieve the body and fit the wing support 94A as shown and fix with 3 x AM screws.
Pic 2: Fix the bonnet support 94C using 1 x SM screw.
Make sure the angled end faces inwards.
Pic 3: Fix the hinge support 94E to the bonnet 1A using 2 x TM screws.
Pic 4: Fix the hinge 94F in place using 1 x QM screw.
Pic 5: Repeat on the other side using the parts 94G and 94H.
Pic 6: Fit the angled bracket 94D into the recess on the bonnet as shown and fix with 1 x SM screw.
Store the assembly and unused part safely for now.roymattblack attached the following image(s):
|
|
|
|
Guest
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
