|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,651 Points: 17,105 Location: ipswich
|
STAGE 81A:
Centre console and control levers.
Pic 1: Fix the hinge 81H to the console lid 81G with 2 x NP screws.
The short step on the hinge fits to the lid.
Pic 2: Fix the lid to the console 81F with 2 x NP screws.
Pic 3: Locate the gear lever parts 81J, 81L, 81M and 81N.
Pic 4: Fit the lever into the blue cover and then add the ball joint 81M from underneath.
Pic 5: Fit the assembly into the surround 81J.
Pic 6: Fix the retaining bracket 81K in place as shown with 2 x KP screws.
Pic 7: Press-fit the handbrake 81I in place.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,651 Points: 17,105 Location: ipswich
|
STAGE 81B:
Pic 8: Fit the assembly to the console as shown and fix from underneath with 1 x CP screw.
Pic 9: Fit the control levers 81D and 2 x 81C to the upper steering cover 81A as shown.
Pic 10: Shows the correct position of the levers from above.
Pic 11: Fix the lower cover 81B in place with 2 x IP screws.
Pic 12: Press-fit the injection monitor 81E in place.
Pic 13: Fit the assembly to the dashboard as shown and fix from behind with 2 x IP screws.
Pic 14: Fit the dashboard to the interior assembly as shown and fix with 1 x IP screw at either end and 1 x IP screw underneath.
Pic 15: Fit the console assembly in place as shown and fix with 2 x CP screws from underneath.
Pic 16: Store everything including the unused screws safely for now.roymattblack attached the following image(s):
|
|
|
|
Guest (2)
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
