|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,668 Points: 17,156 Location: ipswich
|
STAGE 81:
Rear left wheel.
Pic 1: Locate the wheel cover parts 81B and 81C.
They will fit together as indicated.
Pic 2: Fix the parts together with 2 x A screws.
Pic 3: Press the assembly into the front of the wheel 81A as shown.
Store safely for now.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,668 Points: 17,156 Location: ipswich
|
STAGE 82:
Chassis closing panel.
Pic 1: Fit the closing panel 82A to the chassis as shown.
Pic 2: Fix with 2 x A screws where indicated.
Store safely for now.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,668 Points: 17,156 Location: ipswich
|
STAGE 83:
Rear body panels.
Pic 1: Fit the right panel 83B as shown and fix with 2 x A screws.
Pic 2: Fit the left panel 83B as shown and fix with 2 x A screws.
Store safely for now.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,668 Points: 17,156 Location: ipswich
|
STAGE 84:
Rear left wheel – Rain tyre.
Pic 1: Retrieve the wheel from stage 81.
The tyre 84A will fit onto it.
Pic 2: You may find it easier to fit the tyre if you soak it in hot water for a few minutes.
Dry the tyre inside and out and press it onto the wheel rim.
Take care with hot water.
The use of hot water is at the builder’s discretion.
Store the wheel safely.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,668 Points: 17,156 Location: ipswich
|
STAGE 85:
Circuit board.
Pic 1: Fix the circuit board 85D to the chassis with 3 x T screws as shown.
Pic 2: Fix the switch 85C to the chassis with 2 x T screws.
Store everything safely for now.
roymattblack attached the following image(s):
|
|
|
|
Guest
|
US
