|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,684 Points: 17,204 Location: ipswich
|
STAGE 27:
Fittings and hoses.
Pic 1: Assemble hose parts 27A, 27B and 27C as shown.
Pic 2: Slide the long hose under and between the manifolds as shown.
Pic 3: Fit the long end of the hose into the hole on the manifold top as indicated.
Highlighted in red for clarity.
Pic 4: Feed the ‘Tee’ end down behind the connecting pipe as shown.
Pic 5: Fix the valves 27D and 27E where indicated using 1 x G screw in each.
Fit the hoses on the ‘Tee’ connector into the holes on the sides of each valve.
Pic 6: Retrieve the engine cover from stage 24 and fit it in place as shown.
Pic 7: Fix 2 x throttle bodies 26A as shown using 3 x F screws in each.
Pic 8: Repeat on the other side.
Store the engine safely for now.roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,684 Points: 17,204 Location: ipswich
|
STAGE 28:
Left exhaust guard.
Pic 1: Fix the bracket 28B to the guard 28A in the position shown using 2 x B screws.
Pic 2: Fit the guard over the left exhaust and fix using 1 x G screw where indicated.
Store the engine safely for now.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,684 Points: 17,204 Location: ipswich
|
STAGE 29:
Right exhaust guard.
Pic 1: Fix the bracket 29B to the guard 29A in the position shown using 2 x B screws.
Pic 2: Fit the guard over the left exhaust and fix using 1 x G screw where indicated.
Store the engine safely for now.
roymattblack attached the following image(s):
|
|
|
|
Guest (3)
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
