|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,703 Points: 17,261 Location: ipswich
|
STAGE 87A:
Roof interior.
Pic 1: Fix the large panel 87E to the roof lining with 2 x GP screws underneath.
Pic 2: Fix the 2 x smaller panels 87F with 1 x GP screw in each from underneath.
Pic 3: Fix the black box 87G with 1 x BP screw underneath.
Pic 4: Fit the left sun visor 87C as shown.
Pic 5: Fit the hinge pin 87B where indicated.
Pic 6: Fix the retainer 87A (L) with 2 x IP screws.
Pic 7: Repeat on the other side with the right hand parts.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,703 Points: 17,261 Location: ipswich
|
STAGE 87B:
Pic 8: Fit the 3 x LED’s 87I on the inside of the roof lining as shown.
The black tape 87J over the central LED is to hold it in place as it is a very loose fit.
Pic 9: Fix tapes 87J over all of the LED’s.
Pic 10: Fix the wires at the rear of the roof lining using the tab 87H and 1 x IP screw.
Pic 11: Feed the 2 x LED’S on wire 87K through the holes in the car roof where shown.
Pic 12: On the outside, tape the LED’s down with 2 x 87J.
Pic 13: On the inside of the car, secure all of the wires out of the way at the rear.
Pic 14: Fit the roof lining in place and fix with 6 x NM screws.
Pic 15: Fix the front screen pillars with 2 x BM screws.
Store safely for now.roymattblack attached the following image(s):
|
|
|
|
Guest (3)
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
