|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,730 Points: 17,342 Location: ipswich
|
STAGE 27:
Engine 17.
Pic 1: Fit the intake housing 27A to the top of the engine as shown.
Fix with 2 x EM screws.
Pic 2: Press-fit the air duct 27B in place where shown.
Store safely for now.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,730 Points: 17,342 Location: ipswich
|
STAGE 28:
Engine 18.
Pic 1: Locate the intake ducts 28A and 28B.
They are actually identical.
The image shows the locating pins in the undersides.
Pic 2: Press-fit the parts into the top of the engine as shown.
Store safely for now.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,730 Points: 17,342 Location: ipswich
|
STAGE 29:
Engine 19.
Pic 1: Locate fuel line parts 29A and 29B.
They will fit together where indicated.
Pic 2: Parts assembled.
Pic 3: Fit the assembly to the top of the engine as shown.
The parts fit together where highlighted. They will only fit one way.
Store safely.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,730 Points: 17,342 Location: ipswich
|
STAGE 30:
Engine 20.
Pic 1: The engine cover 30A has magnets inside to locate it securely on the top of the engine.
Pic 2: Engine cover in place.
Store safely for now.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,730 Points: 17,342 Location: ipswich
|
STAGE 31:
Engine 21.
Pic 1: Retrieve the engine cover from the previous stage and locate the side panel 31A.
Pic 2: Fix the parts together with 2 x NP screws.
Pic 3: Repeat on the other side with panel 31B.
Pic 4: Store the engine safely for now.
roymattblack attached the following image(s):
|
|
|
|
Guest (2)
|
US
