|
|
Rank: Administration         Groups: Registered, Administrators, Global Forum Support, Moderator, Forum Support Team, Official Builds Joined: 04/01/2016 Posts: 7,295 Points: 22,192 Location: Northamptonshire, England
|
Issue 114
Picture 1 shows the contents of this issue.
Headlights and Wiring
Retrieve the chassis assembly and place the instrument light wires in position at the back of the dashboard as shown in picture 2.
Retrieve the front bodywork and attach the lower front grille and fix it in place using 2 x DS02 screws picture 3.
Place the left and right headlight lens on the left headlight reflectors by push fitting them both in place, picture 4.
Place the headlights on the inside of the front of the body and secure both in place using a DSO2 screw as shown in picture 5.
Attach the cable 11 to the left headlight and cable 12 to the right headlight. Now attach cable 13 to the left turn signal reflector, whilst connecting the cable 14 to the right, picture 6.
Place the front bodywork onto the front fender assembly, carefully feeding the cables to the light either side through the gap as shown in picture 7.
Secure the two body assemblies together using 4 x DS02 screws, picture 8.
Turn the assembly over and run the cables along the underside of the body securing them in place using the wire retainers as shown in picture 9.
Now fit the centre headlights and secure them both in place using 4 x PS05 screw, pictures 10 and 11. Fit the LEDs inside the reflectors, picture 12.
Pictures 13 shows the final assembly for this issue.
Markwarren attached the following image(s): Regards
Markwarren
(Mark) Admin
|
|
|
|
Guest
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
