|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,784 Points: 17,504 Location: ipswich
|
STAGE 1:
Sauron’s mask.
Pic 1: Fit the eye bases A1 and A2 inside the mask M1 as shown.
They will fit over the screw posts with no pressure.
They will only fit one way.
Pic 2: Fit the eye covers A4 and A5 over the eye bases.
Again, they will only fit one way.
Fix with 2 x MS4 screws in each.
Pic 3: Fix the nose base A3 inside the mask using 2 x MS4 screws.
Pic 4: Fit the mask upper front M3 in place on the mask base M2 as shown.
Pic 5: Fix from behind with 3 x MS4 screws.
Pic 6: Fit the mask M1 to the base M2 as shown.
Pic 7: Fix from behind with 1 x MS4 screw.
Pic 8: Store safely for now.roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,784 Points: 17,504 Location: ipswich
|
STAGE 2:
Sauron’s helmet.
Pic 1: Fit the rear plate M5 to the base M4.
Pic 2: Fix from the inside with 4 x MS4 screws.
Pic 3: Locate the neck posts A7 and A8.
Note they are a different profile.
Pic 4: The printed instructions do not show the parts with the correct shape.
Pic 5: Fix the neck part A7 inside the helmet as shown with 2 x MS4 screws.
Pic 6: Fix the rear neck part A8 with 2 x AS5 screws.
Pic 7: Fit the assembly to the mask from the previous stage and fix with 1 x MS4 screw where indicated.
Pic 8: Press-fit the cover A6 in place.
Pic 9: Store everything safely for now.roymattblack attached the following image(s):
|
|
|
|
Guest
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
