|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,838 Points: 17,666 Location: ipswich
|
STAGE 39:
Coolant reservoir.
Pic 1: Retrieve the assembly from stage 38 and fix the bracket 39A in place as shown with 2 x G screws.
Pic 2: Fix the reservoir parts 39B and 39C together with 2 x B screws.
Pic 3: Fix the vent fitting 39D to the tank as shown with 1 x B screw.
Pic 4: Press-fit the cap 39E in place.
Pic 5: Fit the assembly to the bracket just fitted on the top of the frame as indicated.
It will only fit one way.
Pic 6: Fix from underneath with 1 x B screw.
Pic 7: Retrieve the pipe 38J and fit it to the end of the vent tube 39D.
Pic 8: Store safely for now.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,838 Points: 17,666 Location: ipswich
|
STAGE 40:
Power electronics.
Pic 1: Fix the bracket 40A to the cross bar 40B with 1 x G screw.
Pic 2: Fix the bracket 40C to the cross bar 40B with 2 x G screws.
Pic 3: Fix the cooling tube 40D to the electronics base 40E as shown with 1 x B screw from underneath.
The parts will only fit one way.
Pic 4: Fix the base 40F to the assembly with 6 x B screws.
Pic 5: Fix the fitting 40to the assembly with 1 x B screw.
It will only fit one way.
Pic 6: Fix the power unit to the cross bar as shown with 4 x B screws.
Store safely for now.
roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 5,838 Points: 17,666 Location: ipswich
|
STAGE 41:
Air pumps and pipes.
Pic 1: Assemble the pumps and bracket parts 41A, 41B and 41C as shown.
Pic 2: Fix from behind with 2 x B screws.
Pic 3: Retrieve the assembly from the previous stage and fix the pump bracket in place where indicated using 2 x G screws.
Pic 4: View from the other side.
Pic 5: Fit the pipe 41D in place as shown.
Pic 6: Fit the pipe 41E where shown.
Pic 7: Retrieve the left frame assembly and fit the vacuum tank 41F where shown, fixing it with 1 x G screw.
Pic 8: Fit pipe 41G to the end of the vacuum tank as shown.
Pic 9: Connect pipe 41H to the end of pipe 41G.
Store everything and all unused parts safely for now.
roymattblack attached the following image(s):
|
|
|
|
Guest
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
US
