Welcome Guest Search | Active Topics | Log In | Register

Bugatti Veyron official build Stages 3 - 8 Options
roymattblack
#1 Posted : 04 November 2026 15:13:44

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered

Joined: 04/06/2011
Posts: 5,838
Points: 17,666
Location: ipswich
STAGE 3:

Front left wheel.

Pic 1: Fix the wheel rim parts 3C and 3B together using 3 x DS02 screws.

Pic 2: Fit the tyre 3A to the rim.
You will find it far easier if you soak the tyre in hot water for a few minutes and then dry it inside and out.
Make sure the side of the tyre with the smaller tread pattern as highlighted is on the outside of the wheel.

Pic 3: Store everything safely for now.
roymattblack attached the following image(s):
PARTS 3.JPG
3 (1).JPG
3 (3).JPG
3 (4).JPG
roymattblack
#2 Posted : 05 November 2026 14:45:34

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered

Joined: 04/06/2011
Posts: 5,838
Points: 17,666
Location: ipswich
STAGE 4:

Right door and mirror.

Pic 1: Fix the door handle 4C to the door 4A with 1 x PS05 screw.

Pic 2: Press-fit the mirror parts 4B and 4D together.

Pic 3: Fit the mirror to the door as shown.

Pic 4: Fix from the inside with 1 x DS02 screw.

Store safely.
roymattblack attached the following image(s):
PARTS 4.JPG
4 (1).JPG
4 (2).JPG
4 (3).JPG
4 (4).JPG
roymattblack
#3 Posted : 06 November 2026 11:21:49

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered

Joined: 04/06/2011
Posts: 5,838
Points: 17,666
Location: ipswich
STAGE 5:

Right door window and lock.

Pic 1: Retrieve the door from the previous stage and fix the window 5A in place with 3 x DS02 screws.

Pic 2: Slide the spring 5G over the short end of the lock bolt 5D.

Pic 3: Locate the fixing brackets 5E and 5F.
Note they are different widths and 5F has the holes nearer one edge.

Pic 4: Fit the bolt 5D into the recess in the side of the door with the spring on the inside.
Fix the brackets 5E and 5F in place as shown using 2 x DS03 screws in each.

Pic 5: Fix the hinge parts5B and 5C to the other end of the door using 1 x DS05 screw.
Note the orientation of the bracket 5C, highlighted in grey.

Store safely for now.
roymattblack attached the following image(s):
PARTS 5.JPG
5 (1).JPG
5 (2).JPG
5 (3).JPG
5 (4).JPG
5 (5).JPG
5 (6).JPG
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.446 seconds.
DeAgostini